Cold Chain Equipment

​Spare Parts, recommended for every 10 units of TCW80SDD E003/121.

Spare Parts, recommended for every 10 units of VLS076RF SDD E003/119.

Spare Parts, recommended for every 10 units of IceVolt 300P E003/122.

Spare Parts, recommended for every 10 units of Spare set per ten VLS174A AC E003/120

Waterpack Arktek-YBC-5 1L - Set of 8 icepacks

Remote Temperature Monitoring System configured for remote monitoring of vaccine storage conditions in three walk-in cold rooms or freezer rooms.
Haier U-Cool LoRa E006/075
Power Source: Mains electricity
Sensor Type: Wireless
Temperature Monitoring Range: -40°C to +80°C

Vaccine carrier, vaccine storage capacity 2.6 litres

The LogTag Vaxtag (TRID30-7FW), with internal sensor, is an electronic 30-Day Temperature Recorder (30DTR) with factory-programmed alarms and visual display for monitoring storage conditions in vaccine refrigerators (+2°C to +8°C) over a 30-day period. The device shows the actual temperature, all alarm violations over the previous 30 days (on a rolling basis), the daily minimum and maximum temperature of the last 30 days, and the time duration of any violation.Temperature data can be downloaded to a PC via an USB interface cradle, which needs to be ordered separately under material number S0002193 (30DTR Accessory_LogTag USB Cradle)

The LogTag USB Interface Cradle serves as the physical data connection between a LogTag Vaxtag 30-Day Temperature Recorder (30DTR) and a PC for temperature data download. The USB Interface Cradle is supplied with a 1-meter micro-USB to USB-A cable for connection to a PC and can be used to download data from multiple LogTag Vaxtag 30DTRs consecutively.

The LogTag ISOTag is an electronic Irreversible Freeze Indicator (IFI) with an internal sensor, factory-programmed alarm, and visual display for indicating a freeze event during transport or storage of freeze-sensitive vaccines. The device indicates via a visual alarm when an exposure to temperatures below -0.5°C for longer than 60 minutes has occurred. The device needs to be activated prior to use and once an alarm has been triggered, cannot be re-used.