Murex HBsAg Confirmatory, ver.3, kit/50

Murex HBsAg Confirmatory Version 3, kit of 50 tests
Indicative Price 97.61 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description:
Murex HBsAg Confirmatory Version 3 functions by means of specific antibody neutralization of HBsAg in specimens that are repeatedly reactive in the Murex HBsAg Version 3.
It is used in combination with Murex HBsAg Version 3 (9F80) kit.

Technical specifications:
Technology: Enzyme Immunoassay
Format: Reagents, 50 tests
Sample type: serum, plasma
Sample volume: 75µl
Sensitivity: 100%
Specificity: 99.0%
Time to result: 2 hrs

Manufacturer product reference: DiaSorin, 2G27-01.

Kit content:
1.Control Reagent: 1 bottle (1.25ml)
2.Specific Reagent: 1 bottle (1.25ml)
3.Instructions for use

Items required, but not supplied:
1.Distilled or deionised water, Murex HBsAg Version 3 (9F80), stop solution (0.5M to 2M sulphuric acid), glass or plastic tubes or microplates for diluting samples, micropipettes and multichannel micropipettes of appropriate volume, physiological Saline (0.85 g NaCl in 100 ml distilled water) for diluting samples, incubator, microplate washer and microplate reader.
2.Plain/dry vacuum tube (for serum samples), EDTA vacuum tube (for plasma samples), vacuum tube needle, needle holder and centrifuge
3.Disposable gloves, anti-septic swabs, absorbent paper, protective glasses, timer, container for biohazard disposables and disinfectant (for equipment and surfaces).

Shelf life:
17 months from the date of manufacturing; do not use beyond its expiry date.

Storage and transportation:
Between 2-8°C, protected against humidity and direct sunlight. Do not freeze reagents.

Packaging and labeling:
Primary packaging: Murex HBsAg Confirmatory Version 3 reagents and instructions for use, must be contained in one kit.

Weight and volume:
Estimated weight: 0.033Kg
Estimated volume: 0.019m³

General recommendations:
1.Only initiate testing when all components of kit reach the temperature of the environment in which the test will be performed.
2.Follow strictly manufacturer instructions for use of the test procedure (especially adherence to reading time).
3.Do not substitute reagents from other kits/batches.
4.Note that serum or plasma samples require supporting equipment and supplies, therefore a laboratory environment is recommended with adequately trained staff.

Material Safety Data Sheet (MSDS) information:
No environmental hazards.
Related Products