Sand trap pipe,bh,UPVC,150 ND,1m long

General Description:
U-PVC sand trap pipe for boreholes 150 mm nominal diameter 1 metre long

Technical Specifications:
U-PVC sand trap pipe fitted with bottom plug, to be used with casing and screen pipes for installation down to 90 metres.
Supplied in 1 metre lengths, flush joint (unless specifically specified bell socket by the field office), male/female trapezoidal threads, as per DIN 4925/8061.
Nominal diameter: 150 mm (OD 165 mm, ID 150 mm, WT 7.5 mm).

Packaging and labelling:
The pipes are supplied in bulk, in ISO 20-foot container.

Accessories/Spare parts/Consumables:
If required, the following items should be ordered separately:
S0009122 - Casing pipe,bh,UPVC,150 ND,2.9m long
S0009127 - Screen,bh,UPVC,150 ND,2.9m long
S0009164 - Plug,PVC,bottom,bh sand trap,150 ND

Weight/Volume/Dimensions:
Estimated weight: 5 kg
Estimated volume: 17.6 m3

Shipping Details:
Packed in 20-foot ISO container, unless specified otherwise by the field office at the time of ordering, and together with casing and screen pipes, if ordered together. If pipes of several diameters have been ordered at the same time, the smaller diameter pipes will be nested inside the larger diameter pipes to ensure most cost-effective use of the shipping container.

Instructions for use:
The sand trap is used for trapping sand in boreholes.
This pipe is placed below the screen pipes and fitted at the bottom with bottom plug (S0009164).