S5006056

Chlor.pH-test,Dip&Read Strips/PAC-100


Chlorine and pH Test Strips - 2 in 1 indicator, for visual comparison.
Indicative Price : 9.07 USD

General Description:
Chlorine and pH Test Strips - 2 in 1 indicator, for visual comparison.

Technical Specifications:
Low range Chlorine 2-in-1 Rapid Test Strips for simultaneous testing of both Free Chlorine and pH in Drinking Water. Simple Dip-and-Read procedure for results in seconds.
For testing of Free Chlorine (0-10ppm) and pH (6.0-9.0) in the water with the following scales:
Free Chlorine: 0.0, 0.1, 0.25, 0.5, 1.0, 3.0, 6.0, 10.0ppm
pH: 6.0, 6.4, 6.8, 7.2, 7.6, 7.8, 8.2, 9.0
This test strip technology is TMB (Tetramethyl Benzidine) based. It shows equivalent results to DPD comparison technologies (Around 99% certified correlation with DPD), being drinking water compliant. The range of the free chlorine test pad allows both low and high levels of chlorine to be monitored.
The indicator for pH is Bromothymol Blue pH, having easy to read blue colours.

All of the reagents are impregnated on the test strip pad, and no external chemicals are needed to perform the water quality test. The test strip is resistant to interference from Monochloramines. Results are comparable to technologies using soluble DPD1 & pH tablets/powders with simple visual block, pool or disc Comparator.
The test strip is USEPA approved for drinking water compliance.

It is a simple, easy to use test strip for visually testing chlorine and pH of the water, with a simple Dip and Read procedure yielding rapid results (approximately 30 seconds).

Test procedure: Dip one strip in the water for 10 seconds with a gentle back and forth motion. Remove the strip, shake once, briskly, to remove excess water and wait about 10 seconds. Then match pH and free chlorine results with the supplied colour chart.

The Kit includes 100 test strips contained in a water and humidity tight bottle/container, including instructions for use and storage.
It is supplied with an appropriate easy to read Colour Comparison Chart, and as appropriate with Temperature Compensation Chart.

Shelf life: 24 Months (storage temperature not exceeding 32 oC)
After unsealing of the cap, the non-used test strips stored in the re-closed container/bottle are expected to maintain their capacity within the shelf life indication.

Non-hazardous materials.
Alternative products: S5006051, S0000556, S0000557, S0000558


Related Products