Learning Pass. Offline Server Pack - Big
Offline Learning Passport large deployment hardware package (up to 500 users)
Indicative Price 1,608.00 USD
This package includes computer hardware to support the Learning Passport in offline schools (i.e schools without connection to the internet) for up to 500 pupils. The package includes a large server, one access point, cables to connect the access point to server, and PoE power injector for the access point. The Learning Passport software is pre-installed.
If this system is intended to support more than 250 users at any single time, or is intended for a large physical space, additional access points are recommended to increase network capacity and coverage.
In addition to the server, it is recommended that every installation uses a combination Uninterruptable Power Supply (UPS) and Surge Protection device of at least 500VA capacity. Devices meeting this requirement are available from several manufacturers and should be locally procured whenever possible.
Contact UNICEF education and ICTD colleagues for technical support or deployment consultation.
The Learning Passport Offline Server Package - Big includes:
•1 x Medium server
Accessories (to be delivered with each server unit)
•1 x AC-power supply for server
•1 x Access point
•1 x AC-powered PoE injector
•1 x 30cm outdoor network cable to connect server to PoE injector
•1 x 300cm outdoor network cable to connect PoE injector to access point
Learning Passport software developed by Microsoft is installed on each product before shipping.
•Battery is not included with the product.
1.Large server specs:
•Intel® Core™ i7-1185G7E Processor with 8 virtual / 4 physical cores
•16GB DDR4 RAM
•4 x USB 3.1 ports
•2 x USB 2.0 ports
•2 x 1000Base-T ethernet ports (RJ45)
•100-240VAC 50-60Hz power supply.
2.Access Point specs:
•IEEE 802.11a/b/g/n/ac (Wave-2)
•Self Power adaptation upon auto detection of PoE/PoE+
•4 detachable/changeable dual-band omnidirectional antennas (3.5dBi gain for 2.4Ghz & 5Ghz)
•2 × autosensing 10/100/1000 Base-T Ethernet Ports
•Wi-Fi Data Rates - IEEE 802.11ac: 6.5 Mbps to 1733Mbps; IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; IEEE 802.11n: 6.5Mbps to 600Mbps; IEEE 802.11b: 1, 2, 5.5, 11Mbps; IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps *Actual throughput may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment and mix of devices in the network.
•Frequency Bands - 2.4 GHz Radio: 2412 – 2484 MHz; 5GHz Radio: 5150-5250MHz, 5250-5350MHz, 5470-5725MHz, 5725-5850MHz *Not all frequency bands can be used in all regions.
•Coverage Range up to 300 meters *Coverage range can vary based on environment
•4x4:4 2.4G (MIMO), 4x4:4 5G (MU-MIMO)
•Receiver Sensitivity - 2.4G 802.11b: -96dBm@1Mbps, -88dBm@11Mbps; 802.11g: -93dBm @6Mbps, -75dBm@54Mbps; 802.11n 20MHz: -73dBm @MCS7; 802.11n 40MHz:-70dBm @MCS7 5G 802.11a: -92dBm @6Mbps, -74dBm @54Mbps; 802.11ac 20MHz: -67dBm@MCS8; 802.11ac: HT40:- 63dBm @MCS9; 802.11ac 80MHz: -59dBm @MCS9
•Maximum TX Power - 2.4G: 27 dBm; 5G: 25 dBm *Maximum power varies by country, frequency band, and MCS rate
•Channel Bandwidth - 2.4G: 20 and 40MHz; 5G: 20, 40 and 80MHz
•Network Protocols - IPv4/IPv6, 802.1Q, 802.1p, 802.1x, 802.11e/WMM
•Wall mount or pole mount - kits included
•IP66-level weatherproof capability when installed vertically
3.PoE injector specs:
•48VDC, 0.65A Output Voltage
•100 – 240 VAC, 50/60Hz Input Voltage
•0.75A at 90 VAC Input Current
•Difference and Common Mode surge protection
•11V Data, 60V Power Clamping protection
•802.3at PoE+ compliant
•Category 5e or better applications
•Rated for 350Mhz / 1 Gbps communications
•Suitable for outdoor use
5.Classifications and Standards:
•Three Years: Two years manufacturer’s warranty & one year extended carry-in warranty.
•Must be kept dry and within -30°C to 70°C, relative humidity up to 95%
•Operating conditions: -10 °C to 60°C, relative humidity up to 5% to 95% non-condensing
•Storage conditions: -30°C to 70°C, relative humidity up to 95%
Items supplied with:
- User manual with clear instructions in English for specific set-up / installation
- For Technical support, Please contact UNICEF Education Colleagues
Items required, but not supplied:
•Additional access points as required per additional 250 users
Optional accessories to be considered for local procurement:
•Uninterruptable Power Supply (UPS) and Surge Protection device of at least 500VA capacity.
•A UPS can be defined as a battery backup for the server
•Note: A UPS is not required for non-grid-tied solar applications with an attached battery bank
Material safety data sheet information (MSDS):
Component of a KIT:
•If this system is intended for a large physical space, additional access points are recommended to increase network capacity and coverage.
•It is recommended that every installation uses a combination Uninterruptable Power Supply (UPS) and Surge Protection device of at least 500VA capacity. Devices meeting this requirement are available from several manufacturers and should be locally procured whenever possible
•Contact UNICEF education colleagues for technical support.
S0000902Learning Pass. Offline Server Pack - Mid
S0000904Access Point for wireless connectivity
|To see icon descriptions, go to |
' Product attribute guide'