Refrigerator, blood bank, 90 units

General description:
Refrigerator: Blood bank, Approximately 60 units
Storage capacity: 84, 90 or 132 units of 450 ml
Quantity: 1 Unit

Technical specifications:
Product Description: Upright refrigerator for storing whole blood or red blood cell packs in a blood bank with the following minimum specifications:
1.Compression type, CFC-free refrigerant.
2.Storage capacity: 84, 90 or 132 units of 450 ml.
3.Fan-cooled for even distribution of air in the cabinet.
4.Roll out drawers or shelves, easily height adjustable.
5.Material, internal: Internal stainless steel, aluminium or equivalent.
6.Material, External: Epoxy coated steel
7.Insulation material: Polyurethane, CFC-free
8.Lockable door, glass or solid.
9.Electronic temperature control: 2°C to 6 °C
10.Accuracy, regardless of the load: +/- 1 °C
11.Hold-over time: around 35 minutes. (empty load at 4 °C (+/- 1 °C) takes at least 31minutes. to reach 10°C, at ambient 25°C)
12.Cooling-down time: Cooling-down time: around 15 hrs.
13.Ambient operating temperature acceptable range: Lower 10°C, upper 32°C.

Temperature monitoring:
1-External digital display with actual interior temperature, minimal graduation 0.1°C.
2-Electronic temperature recording device: includes data logger (optional or standard, depending on the refrigerator model).
3-Audio and visual alarm system indicates unsafe temperatures (optional or standard, depending on the refrigerator model).
4-Battery back-up for audio and visual alarm system, and temperature recording device (optional or standard, depending on the refrigerator model).
5-Fit with remote alarm connection and interface (optional or standard, depending on the refrigerator model).

Other requirements:
1-Fitted with integrated castors.
2-Minimum compressor starting voltage compressor starting voltage: +-10%.
3-Power requirements: 220 V / 50 Hz as a standard, (110/60 Hz is available if requested), Single Phase.
4-Power consumption: approx. 350W

Supplied with Automatic voltage regulator:
A microprocessor-controlled spike and surge protection and protection against disturbances.
1-Nominal output voltage: 220 V / 50 Hz, Single phase, 110/60 Hz (If requested), Single Phase.
2-Accepted input range: 160-280 VAC for 220 V/50 Hz system and 82-159 volt for 110/60 Hz (If requested), Single Phase.
3-Output accuracy: ≤ +/- 10 %
4-Response time: <15 ms or 50 s (depending on the model)
5-LED display showing connected/disconnected status, voltage fluctuation and load as % of nominal current or a digital display showing temperature, voltage, electricity (depending on the refrigerator model).
6-Permissible overload: Permissible overload: 1000 % within 60 ms protection.
7-Electronic fuse disconnects and reconnects automatically (optional depending on the model).
8-kVA rating matches power consumption of the refrigerator.

Warranty:
The Refrigerator is to be covered by a two-year replacement warranty in the event of any component failure arising from defective design, materials or workmanship.

Spare parts:
Manufacturer will publish a list of spare parts recommended for 5 years of operation (in operation manual, website or as a list to be sent with refrigerator). Manufacturer will ensure supply of spare parts for a minimum of 5 years from the time of cessation of the last production of equipment.
Note: Spare parts supply is not mandatory during the warranty period.

Materials:
Restricted materials: The product and its constituent components, does not contain lead (except in batteries), mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated biphenyl ethers (PBDE).

Other restricted materials: The appliance and its constituent components, does not contain lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated biphenyl ethers (PBDE).

Instructions for use
The refrigerator is used for blood transfusion services.
The refrigerator is used in wide range of laboratory services from basic laboratory to hospital centre.

Instructions for use, preventive maintenance and troubleshooting are supplied in English as a standard with the refrigerator (French and Spanish instructions available depending on the refrigerator model).

Packaging and Labelling
Refrigerator will be packed with suitable protective packaging for the international shipment such as; packing foam, corrugated carton, non-fumigation pallets, pallet straps. The packaging will be compliant to restricted material requirements mentioned above.

Labelling:
Compliance with EAN 128 bar code requirements.

Weight - Volume:
Estimated Unit Weight in Kg (including its packaging): 116 kg
Estimated Unit Volume in M3 (including its packaging): 0.89 m3