Biosafety cabinet,class III,stand alone

General description:
Intended use: Airstream Class III, Biological Safety Cabinet, 4ft/1.2m is offer the highest level of product, operator and environmental protection from infectious and bio-hazardous aerosols. Class III cabinets are designed for microbiological work demanding extremely high levels containment and are therefore often used for work involving some of the deadliest biohazards, bacteria, viruses and microorganisms.

Technical specifications:
·This BSC, class III is certified as per EN 12469
·Neoprene™ Synthetic Arm-length Gauntlets: Single piece, leak-tested assembly guarantees maximum protection and flame and abrasion resistant
·Silent operation or Noise pressure levels EN 12469: <51 dBA, NSF 49: <54 dBA
·Pass Box equipped with interlocking doors that permits materials transfer without risk of environmental contamination
·Exterior: 1.5 mm (0.06") 16-gauge electro-galvanized steel with white oven-baked epoxy-polyester ISOCIDE™ antimicrobial powder coated finish
·Interior 1.2 mm (0.05") 18-gauge stainless steel, type 304, with 4B finish
·Footswitch for pass box control
·ULPA Downflow, 1st Exhaust, 2nd Exhaust Filters Efficiency: 99.999% at 0.1 to 0.3 μm and MPPS
·Initial Airflow Volume: 355 cfm
·Minimum Required Negative Pressure: -200 Pa
·Nominal Required Negative Pressure: -275 Pa
·Prefilter: Disposable and non-washable polyester fibers with 85% arrestance / EU3 rated
·Sentinel Silver microprocessor with LCD display, soft touch buttons, LED light indicator, continuous display of all operational parameters
·It has blower hour meter
·It displays laminar airflow velocity and frontal air barrier velocity
·It displays ambient temperature
·It has H14 filter life display, UV life display, no carbon filter
·It displays only estimated filter life, no differential pressure monitoring for filter loading
·It has airflow fail alarm only, no motor malfunction alarm
·It warns of power failure
·Optimum environmental requirements for the BSC:
-Relative humidity between 20% – 90%
-Temperature between 18-30°C
·Power requirements 220-240V, AC, 50Hz, Single Phase
·The manufacturer will provide Factory Test Report as per EN 12469 for each BSC individually before shipment
·Standard warranty: 3 years

Manufacturer product reference:
Esco Micro Pte Ltd., Model Code: AC3-4B1

Items supplied with:
·UV lamp - UV-30A UV Tube 30W
·EO Electrical outlet
·Spare filters: Downflow Filter - 1100002, Exhaust Filter - 1100001 and Secondary Exhaust Filter - 1100014

Training and installation can be purchased as a separate package.
Service and maintenance can be purchased as a separate package.

Weight & volume:
Estimated weight: 556.00kg
Estimated volume: 7.31m³

Packaging and labelling:
Primary packaging: All contents of 1 (one) unit Biosafety cabinet, class III, stand alone
Secondary packaging: 1 (one) unit Biosafety cabinet, class III, stand alone