Wheelchair, assistnt controlld,transport

GENERAL DESCRIPTION
Wheelchair, manual assistant-controlled, transport wheelchair.

IMPORTANT INFORMATION
Minimum order quantities apply.
Inappropriate prescription and fitting of wheelchairs, cushions and accessories may harm the user’s health and/or function. Therefore, this product should only be purchased after consultation with the Medical Devices Unit in Supply Division.

INTENDED USE
Wheelchair, manual assistant-controlled: Transport wheelchair.
FUNCTION AND ENVIRONMENT: Standard wheelbase and overall length. For intermittent or short-term transport in healthcare facilities.
POSTURAL SUPPORT: For older CHILD and ADULT users who can sit upright and balanced without additional support.
SUPPLIED WITHOUT CUSHION.


TECHNICAL SPECIFICATIONS
Overall length:
Maximum 1080 mm
Size and dimensions:
Seat width: 500 mm
Seat depth: at least 425 mm
Backrest height: at least 430 mm

Frame and seating system:
Folding frame
Push handles, integrated with back post, non-slip, ergonomic grip
Seat-to-back support angle: Not adjustable, 90 degrees with bend in back post in lower thoracic area
Back support upholstery: sling
Seat angle: 3 degrees
Seat upholstery: sling
Rear wheel position safe. In line with back post attachment to seat
Integrated tipping lever in frame for assistant to tip wheelchair to lift front castors to clear obstacles

Arm supports:
Removable arm supports
Arm support pad: Approximately 70% of seat depth.
Arm support design to protect clothing and cushion from rear wheels, dust, mud, etc.
Fixed height arm support: at least 240 mm high

Foot supports:
Seat to lower leg support angle: at least 109 degrees
Two individual flip-up and swing-away foot supports
Height adjustable range: at least 330-410 mm

Rear wheels and parking brakes:
Two small/medium rear wheels:
Diameter x width: 400 x 25 mm OR 305 x 45 mm depending on model selected
Puncture-proof rear tyres, solid polyurethane tyres
Rear wheels parking brakes, frame mounted, push-pull type.
Fixed axles

Front castors:
Two large diameter castors
Diameter x width: 200 x 50 OR 32 mm depending on model selected
Puncture-proof, solid polyurethane castor wheels

Wheelchair weight:
Total weight: 19 kg

User weight capacity:
User weight capacity: 125 kg

ASSEMBLY
Depending on model selected: Either: Fully assembled, with standard removeable parts (footrest hangers) to be attached OR partly assembled and need to install castors (time required 3 minutes, with tools included, no training required, detailed, illustrated assembly manual included)

SUPPLIED WITH
Detailed illustrated instructions for safe use

WARRANTY
Limited warranty to cover defects in material and workmanship only. Warranty excludes normal wear or damage following inappropriate use or lack of maintenance.
Frame: at least 2 years
Components: at least 1 year

MINIMUM ORDER QUANTITIES
Minimum order quantities apply

PACKAGING / LABELLING
Please note: Minimum order quantities apply
One (1) unit per box
Dimensions:
- Unit Weight in Kg (including its packaging): 25 kg
- Unit Volume in m³ (including its packaging): 0.2 m³
Labelling: Compliance with EAN 128 bar code requirements

ESTIMATED LEAD TIME
35 days

ITEMS REQUIRED, BUT NOT SUPPLIED
N/A

ESTIMATED LIFE SPAN
5-10 years depending on model selected

ENVIRONMENTAL CONDITIONS
Storage conditions: -10 to 40 degrees Celsius; / 20 to 90% RH
Operating conditions: -10 to 40 degrees Celsius; 20 to 90% RH

USER FITTING AND TRAINING REQUIREMENTS
Users to be fitted and trained by trained wheelchair service personnel

MAINTENANCE REQUIREMENTS
Product maintenance as per manufacturer’s instructions by trained technical personnel.

RELATED PRODUCTS
S0004012, Cushion,wheelchair, posture, layered

ALTERNATIVE PRODUCTS
S0004005, Wheelchair,active urban,fold,more support

QUALITY MANAGEMENT SYSTEM
- Manufacturer is certified for ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes.
- Supplier is certified for ISO 9001 Quality management systems – Requirements.

MARKET CLEARANCE AND DEVICE CLASSIFICATION
CE certified under the EU MDR 2017/745 as Class I device.

SAFETY AND PRODUCT STANDARDS
Depending on model selected, either:
ISO 7176-1:2014; and
ISO 7176-3:2012; and
ISO 7176-5:2008; and
ISO 7176-7:1998; and
ISO 7176-8:2014; and
ISO 7176-16:2012 or 16840:-10:2014
OR
EN 12183:2014

NOMENCLATURE
GMDN Code:
41630