PSA plant,530LPM package w/cyl,standard

GENERAL DESCRIPTION
Large PSA oxygen plant package, standard (not containerized), comprising of 530 LPM medical oxygen generator (29 Nm3/hr continuous flow), with 18 Nm3/hr 10-cylinder-filling station, back-up manifold, cylinders, pressure regulators, flowmeters and humidifiers. Includes replacement parts and warranty for 2 years. Installation, commissioning and training is included. Price is indicative FCA. (After-sales service package available separately).

TECHNICAL SPECIFICATIONS
COMPLETE 530 LPM MEDICAL OXYGEN GENERATOR
- Oxygen purity: 95% +/- 1%
- Analysis system type: Zirconium
- Max/peak oxygen flow: 32 Nm3/h
- Continuous oxygen flow: 29 Nm3/h
- Outlet pressure range: 4.5 - 6 barg
- Power supply requirement: 230V - mono phase - 50Hz

Complete FEED AIR STATION specifically designed to best fit the Oxygen Generator.

OXYGEN AUTOMATIC CHANGE-OVER SYSTEM BS (ACO)

HIGH PRESSURE OXYGEN CYLINDER FILLING SYSTEM with 10-cylinder 18 Nm3/hr filling capacity.

CYLINDERS AND RELATED ACCESSORIES
- 150 x High pressure oxygen cylinder type B20 200 bar with BS valve
- 40 x High pressure oxygen cylinder type B50 200 bar with BS valve
- 100 x Oxygen cylinder pressure regulator with floating ball flowmeter 0-15LPM – BS
- 100 x Sterilizable humidifier 350 ml
- 10 x Cylinder trolley for 1 cyl. B20, 10 x for 2 cyl. B20
- 2 x Cylinder trolley for 1 cyl. B50, 2 x for 2 cyl. B50

DIN or CGA valve type available on request

SEMI AUTOMATIC MANIFOLD BANK 40 M3/H
Main specifications:
- Norm: ISO
- Maximum flow: 40 m3/h
- Medical gas: O2
- Cylinder connection type: pigtails
- Cylinder connection standard: BS
- Alarm panel: yes
- Number of ramps: 2
- Number of pigtails: 2 X 5

AUTOMATIC VOLTAGE STABILIZER WITH PHASE CONTROLLER - 100 kVA

SUPPLIED WITH
Maintenance kits required for an operation period of 2 years
Tool kit for oxygen plant maintenance

Additional installation equipment and material, includes interconnection pipes and hoses, inlet and exhaust ducts for compressor and air extractor or air conditioning (to be defined according to site needs)

EQUIPMENT INSTALLATION - COMMISSIONING - TRAINING
By supplier engineer (or regional partner) – estimation 5 days on site
Includes:
- On-site equipment installation + set up of electrical and pneumatic connections
- Equipment start-up and tests
- Technical training of the local team
- Hand-over
- Air round trip ticket to main closest international airport
- Local accommodation and meals
- Local transportation

ADDITIONAL ACCESSORIES AND EQUIPMENT, NOT SUPPLIED:
Available at additional unit cost:
- High pressure oxygen cylinder type B50 200 bar with BS valve (DIN or CGA available)
- High pressure oxygen cylinder type B20 200 bar with BS valve (DIN or CGA available)
- Oxygen cylinder pressure regulator for oxygen therapy with floating ball 1 flowmeter 0-15LPM BS
- Sterilizable humidifier 350 ml
- Cylinder trolley for 1 cyl. B50
- Cylinder trolley for 2 cyl. B50
- Cylinder trolley for 1 cyl. B20
- Cylinder trolley for 2 cyl. B20
- Semi automatic manifold medgas bank 40 m3/h
- Other related items may be available on request

ENVIRONMENTAL CONDITIONS
Specific design for operation in the following conditions:
- Site Altitude max.: 2500 m
- Plant Room Temperature max.: 45 °C

ESTIMATED LEAD TIME:
8-10 weeks to FCA port

WEIGHT/VOLUME (packaged):
Weight: 12,117 kg
Volume: 41.5 cubic metres

WARRANTY
2 years from installation and commissioning

REGULATION & CONFORMITY REQUIREMENTS
CE Medical mark for all medical systems and oxygen generators

SAFETY & PRODUCT STANDARDS
Air quality in full compliance with ISO 8573-1.
ISO 9001:2015: Quality management system of organisation
ISO 13485:2016: Quality management system for the design of medical systems

NOTES
As specifications and fees are dependent on customer requirements and country of deployment, please contact UNICEF Supply Division, HTC, Oxygen Unit for further guidance oxygen@unicef.org