PSA plant,300+300LPM duplex w/cyl, skid

GENERAL DESCRIPTION
Medium duplex PSA oxygen plant package, skid-mounted comprising of 2 x 300 LPM medical oxygen generators (18+18 Nm3/hr), with 15Nm3/hr cylinder-filling station, back-up manifold for connection to hospital oxygen pipeline, cylinders and cylinder accessories. Includes replacement parts and warranty for 2 years. Installation, commissioning and training is included. Price is indicative FCA. (After-sale service package available separately).

TECHNICAL SPECIFICATIONS
2 x 300 LPM Medical Oxygen Concentrator Plant (all-in-one with enclosed air compressor, dryer, filtration, and air tank) with turndown capability up to 25% of nominal capacity
·Flow rate: 18 m3/h, 300 l/min
·Variable speed drive air compressor of IE4 rating and higher
·Air dryer capability- 3 degrees Celsius pressure dew point
·Compressed air quality conforms to ISO8573-1 Class 1
·Oxygen purity 93+-3%
·Oxygen filters- 0.01micron filter conforming to ISO8573-1:2010
·Oxygen pressure 0.45 MPa
·Compact structure- dimensions 2.15 x 1.12 x 1.82m
·Weight- 1100kg
·Power supply AC 400V, 50Hz 3-phase, 22 kW consumption
·Nominal flow up to 40 degrees Celsius, minimal derating up to 45 degrees Celsius.
2 x 2000L OXYGEN TANK
4 x Stainless Steel Braided Flexible connections kit for oxygen generator, 2 pieces
SMART CONTROL MODULE- central point of supply of duplex concentrators:
·Able to combine inputs from two (or up to 3) oxygen plants
·With secondary analyzer for flow and purity monitoring
·Rotate duplex oxygen generator units to equalize hours
·Communicate operational parameters via the cloud.
OXYGEN BOOSTER PUMP FOR CYLINDER FILLING- air-cooled, oil-free oxygen pump with 24/7 duty cycle:
·Oxygen flow- 15m3/hr, 250 litres per minute
·Suction pressure- 0.3-0.4 MPa (3-4 bar)
·Maximum discharge pressure- 15 MPa (150 bar)
·Motor power- 7.5kW
·Power supply- 3 phase, 400V, 50 Hz AC
Filling ramp for 10+10 cylinders BS341
AUTOMATIC MANIFOLD, O2, 2x 10 DOUBLE STACK conforming to NHS Health Technical Memorandum No. 02-01 (HTM 02-01), BS EN ISO 7396-1, BS EN ISO 15001 and BS EN ISO 10524-2.
·Complete manifold system with:
·Oxygen Manifold Header Rack 2x6
·2 x Loop Connection 5/8" M/F
·4 x Header Pipe Rail Kit 2 Gases- for oxygen, left and right
·12 x O2 Bullnose (BS 341 No. 3) Top Entry Tailpipe
·O2 Extended Bullnose (BS 341 No. 3) Top Entry Tailpipe
2 x Automatic voltage stabilizer 100kVA
·Rated capacity 100kVA
·3 phase, 50 Hz
·Input voltage- 304-456V; output voltage 380V, rated output current- 152A
·Accuracy of voltage regulation- 1-5%
MEDICAL CENTRAL ALARM AND REPEATER ALARM- with input signals from concentrator, monitoring of line pressure, flow and 4 x 20mA single or dry contact inputs:
·Combo alarm- master alarm for plant room
·Repeater alarm for Master Alarm for office
·2 x Pressure sensor 4-20 mA
CYLINDERS AND ACCESSORIES
·50 x Medical cylinders, 40L, ISO 9809
·150 x Medical cylinders, 20L, ISO 9809
·80 x Oxygen pressure regulator with gauge, humidifier, and flow meter 0-15 LPM

SUPPLIED WITH
Preventive maintenance parts and consumables required for an operation period of 2 years including:
40 x Flexible pigtail spare BS 341, pieces
2x Electrical cubicle (Standard electric supply board)

EQUIPMENT INSTALLATION - COMMISSIONING - TRAINING
Installation, commissioning, and personnel training, including cost of travel.

ENVIRONMENTAL CONDITIONS
Specific design for operation in the following conditions:
- Site altitude for rated output.: up to 2000 m
- Plant Room Temperature max.: 40 °C
Performance derating table for altitude up to 3000m temperature up to 45 °C

ESTIMATED LEAD TIME:
10 weeks to FCA port/airport

WEIGHT/VOLUME (packaged):
Weight: 13483 KG
Volume: 52.8 CBM

WARRANTY
2 years from installation and commissioning. This warranty shall only be effective when all maintenance or repair work (if any) has been carried out by personnel duly authorized by the Company and does not extend to any damage or loss occasioned by misuse, improper handling or operation, accident, and/or inadequate maintenance of the Products. The Company shall not be liable in any manner (whether in contract, negligence, or tort) for any damage or loss to or arising from the Products which occurs after the said machinery or parts warranty period as the case may be. Save for the above, all statutory warranties and conditions are expressly excluded and shall not be deemed to have induced the order.

REGULATION & CONFORMITY REQUIREMENTS
CE Medical mark for all medical systems and oxygen generators

SAFETY & PRODUCT STANDARDS
Air quality in full compliance with ISO 8573-1.
ISO 9001:2015: Quality management system of organisation
ISO 13485:2016: Quality management system for the design of medical systems

NOTES
As specifications and fees are dependent on customer requirements and country of deployment, please contact UNICEF Supply Division, HTC, Oxygen Unit for further guidance oxygen@unicef.org