S0005212

Sagar VoltStab 10kVA 230V 1ph


Sagar 10kVA, 230/400V 50Hz, single phase Voltage stabilizer designed to reduce fluctuations in input voltage for cold rooms or freezer rooms.
Indicative Price 950.00 USD

1.General Description:
Sagar 10 kVA, 230/400V 50Hz, single phase Voltage Stabilizer SVS-10K-1P is designed to reduce fluctuations in input voltage, and to thereby ensure a stable electricity supply for cold rooms or freezer rooms in situations where the mains voltage is subject to wide fluctuations.

Units operating from a mains supply of 220V/3/60Hz ±5% are available upon request. Please confirm the power rating during the time of ordering for this option.

2.Technical Specifications:

2.1 Performance
Nominal Output Voltage: 230V (+/- 2%), 50Hz
Operating Input Voltage Range: 110-285V
Input Frequency Fluctuation Range: 50Hz(+/- 5%)

2.2 Features
1.Input and output circuit breakers
2.In-built manual bypass switch
3.Type 2 surge suppression
4.Overload, over-temperature and short circuit protection, with on-delay feature
5.The device switches to 0V at the limits of the input fluctuation range. The output supply is restored automatically after a delay of three to six minutes.

2.3 Capacity rating
The device is rated at a minimum of 10kVA peak load.

2.4 Construction
1.Full out/input voltage indicators and LED status indicators are positioned on the front or top of the unit.
2.Galvanized steel casing, on castors.
3.Protection against dust and water ingress: IP21 rating or better.
4.Direct or strip wire connectors.

2.5 Cabling
Each voltage stabilizer supplied with the following cabling:
1.Length: 20 meters
2.Construction: Plain annealed copper conductor, PVC Insulated, PVC Sheathed, Single core cable.
3.Size: Copper 1 x 2.5mm

3.Warranty
The product is to be covered by a two-year replacement warranty in the event of any component failure arising from defective design, materials or workmanship.


Related Products