Sollatek VoltStab 10kVA 230V 1ph

1.General Description:
Sollatek 10 kVA, 230V 50/60Hz, single phase Voltage Stabilizer SVS45E 45A is designed to reduce fluctuations in input voltage, and to thereby ensure a stable electricity supply for cold rooms or freezer rooms in situations where the mains voltage is subject to wide fluctuations.

2.Technical Specifications:

2.1 Performance
Nominal Output Voltage: 230V (+/- 5%), 50/60Hz
Operating Input Voltage Range: 100-290V
Input Frequency Fluctuation Range: 47/75Hz

2.2 Features
1.Input and output circuit breakers
2.Type 2 surge suppression
3.Overload, over-temperature and short circuit protection, with on-delay feature
4.The device switches to 0V at the limits of the input fluctuation range. The output supply is restored automatically after a delay of three to six minutes.

2.3 Capacity rating
The device is rated at a minimum of 10kVA peak load.

2.4 Construction
1.Full out/input voltage indicators and LED status indicators are positioned on the front or top of the unit.
2.Galvanized steel casing, on castors.
3.Protection against dust and water ingress: IP21 rating or better.
4.Direct or strip wire connectors.

2.5 Cabling
Each voltage stabilizer supplied with the following cabling:
1.Length: 20 meters
2.Construction: Plain annealed copper conductor, PVC Insulated, PVC Sheathed, Single core cable.
3.Size: Copper 1 x 2.5mm

3.Warranty
The product is to be covered by a two-year replacement warranty in the event of any component failure arising from defective design, materials or workmanship.