Handpump,TARA,DA 9-15m,Variant 2 Lao

General Description:
TARA Direct Action (low lift) hand pump, package Variant 2, for cylinder installation depths 9 to 12 meters, so called LAOS version.

Technical Specifications:
TARA Direct Action (lowlift/shallow well) hand pump (LAOS version), for cylinder installation depths 9 to 12 meters,
(as per SKAT/RWSN Specifications Edition 2005 and as per IS:14106 (with latest amendments)) with glued (solvent cemented) PVC riser main and pump rods), complete as per below specifications:

1 x Complete set of pump body with handle retainer and HDPE top bush
1 x Complete assembly of handle assembly with rubber cushions
1 x Complete assembly bottom flange assembly with bolts, with intermediate conical flange and suitable for bolting on to concrete platform
1 x Conical rubber grommet modified
1 x PVC reducer (1 pc. PVC reducing socket 88.5mm ID and max. 93mm OD at the top side to fit with PVC casing pipe 89 mm OD x 60mm OD at the bottom side to fit with PVC cylinder reducer of 60mm ID & 1 pc. PVC cylinder reducer 60mm ID at the top side to fit with PVC reducing socket 60mm OD x 48mm ID at the bottom side to fit with 48 mm OD PVC lower casing)
1 x Double ended spanner M17 x M19
2 x Combination spanner
1 x MS retrieving rod, 2.20 meter long, electro galvanized
1 x Solvent cement 250mt in aluminium extruded bottle
with PE stopper and sealed with plastic cap
4 x PVC pump rod with threaded joints cemented, 42mm OD x 3 meters
1 x PVC top pump rod with threaded joints cemented, 42mm OD x 3 meters
4 x PVC raising mains with threaded joints cemented, 60mm x 3 meters
1 x Complete assembly of 60mm OD x 2 meters long PVC cylinder pipe assembly with one complete foot valve assembly and one rubber seat
1 x PVC top raising main with threaded joint cemented, 60mm OD x 3 meters
1 x PVC well screen assembly, 2 meters long
2 x PVC lower casing 48mm OD x 3 meters with bell connectors to fit item 15
1 x PVC sand trap complete assembly with end cap 48mm OD x 1 meter with ball connector to fit item 15
Piston Rod and Piston Assembly

Supplied with:
TARA Hand pump caretaker fast moving spare parts,
each set comprising of:
1 x Nitrile rubber cup seal as per fig. 22D
1 x "O" ring for foot valve as per fig. 26B
1 x Flap valve for foot valve as per fig. 26C
1 x Flap valve for piston valve as per fig. 22C

Packaging and labeling:
Solvent Cement and Cleaning fluid cannot be air freighted.
The pumping set packaging depends on the shipment type.
At a minimum, as per Annex C: Clause 12.1 of Part 1 of IS 15500:2004, Recommended Packaging Procedure.

Accessories/Spare parts/Consumables:
One set of Caretaker Fast Moving Spare Parts is included in the kit.
If required, the following items should be ordered separately:
TARA hand pump Slow Moving Spare Parts kit,
comprising of:
* Foot valve, complete sub assembly ( 1 sub assembly).
* Piston, complete sub assembly ( 1 sub assembly).
* Top guide bush (1 piece).
* Rubber seat for cylinder ( 1 piece).


Shipping Details:
Sea shipment: Wooden crate packing, steel strapped bundles in HDPE sheets for the connecting rods and the riser pipes.

Air shipment: Corrugated cardboard, jute/plastic laminated sheets, steel strapped and marked, steel strapped bundles in HDPE sheets for the connecting rods and the riser pipes.

For quick sea delivery, it is essential that the minimum quantities to be ordered correspond to one fully loaded ISO 20-foot container.

Instructions for use:
The pump is used for pumping water from shallow wells between 7 and 15 metres.

Related products:
S0005820