Footpump,VERGNET,type HPV100,80m well

General Description
Foot pump, VERGNET HPV 100, for 80 metres installation depth

Technical Specifications
Complete Vergnet hydro-pump; type HPV 100, hydraulic transmission, foot operated and multi-operator pump type, supplied with 80 metres each of complete pressure (command/transmission) and riser (discharge) pipes.

Supplied with
1 x pump barrel
1 x base plate with sealing pins
1 x command cylinder, stainless steel
1 x command hose
1 x lower pumping element, stainless steel
1 x delivery hose
1 x pack of clips
1 x installation manual
1 x maintenance manual
1 x tool kit (Vergnet ref. 1086)

Comment
When ordering this pump, the borehole external casing diameter must be specified to enable the supplier to determine the appropriate pedestal size.

Packaging and labelling
The pumping unit is packed in a wooden box or into a container if a considerably quantity is ordered and when else appropriate.
Containerization (Set quantity depending on riser length/installation depth): Quantity 50 complete pump sets per 20-foot ISO shipping container.

Weight and Volume
Estimated Weight: 100 kg
Estimated Volume: 0.8 m3

Accessories/Spare parts/Consumables
One maintenance tool kit (level 1) is included with the pump. It is recommended that one installation and one standard tool kit (level 2) be ordered for every 15 pumps. The Field Office is to specify the number when placing orders.

If required, the following items should be ordered separately:
1 x installation and maintenance kit (Vergnet ref. 1074 and 1271); please use UNICEF Catalogue No. S0005813.
1 x spare parts kit for 2 years operation, please use UNICEF Catalogue No. S0005811.

Instructions for use
While this kit is supplied with equipment for a 80 metres installation depth, this pump type can be used for pumping water from wells 50-120 metres deep.

Related products
For inferior riser length specifications, please order with Catalogue Number S0005830 (HPV100 for 60m installation depth).