Footpump,VERGNET,type HPV60,55m well

General Description
Foot pump, VERGNET HPV 60-2000, for 55 metres installation depth

Technical Specifications
Complete Vergnet hydro-pump, type HPV 60-2000, but supplied with 55 metres each of complete pressure (command/transmission) and riser (discharge) pipes.

Supplied with
1 x pump barrel
1 x base plate with sealing pins
1 x command cylinder, stainless steel
1 x command hose
1 x lower pumping element, stainless steel
1 x delivery hose
1 x pack of clips
1 x installation manual
1 x maintenance manual

1 x tool kit (Vergnet ref. 1086 - Level 1)

Comment
When ordering this pump, the borehole external casing diameter must be specified to enable the supplier to determine the appropriate pedestal size.

Packaging and labelling
The pumping unit is packed in wooden box or into a container if a considerable quantity is ordered and when else appropriate.
Containerization (Set quantity depending on riser length/installation depth): Quantity 80 complete pump sets per 20-foot ISO shipping container.

Weight and Volume
Estimated Weight: 90kg
Estimated Volume: 0.8m3

Accessories/Spare parts/Consumables
One maintenance tool kit (level 1) is included with the pump. It is recommended that one installation and one standard tool kit (level 2) be ordered for every 15 pumps. The Field Office is to specify the number when placing orders.

If required, the following items should be ordered separately:
1 x installation and maintenance kit (Vergnet ref. 1074), please use UNICEF Catalogue No. S0005814.
1 x spare parts kit for 2 years operation, please use UNICEF Catalogue No. S0005812.

Instructions for use
This pump is used for pumping water from 10-60 metres deep wells, while this kit is supplied with equipment for a 55 metres installation depth.

For inferior riser length specifications, please order with Catalogue Numbers S0005827 (HPV60-2000 for 40m well) and S0005824 (HPV60-2000 for 20m well).