Footpump,VERGNET,type HPV60,40m well

General Description:
Foot pump, VERGNET HPV 60-2000, for 40 metres installation depth.

Technical Specifications:
Complete Vergnet hydro-pump, type HPV 60-2000, but supplied with 40 metres each of complete pressure (command/transmission) and riser (discharge) pipes.

Supplied with:
1 x pump barrel
1 x base plate with sealing pins
1 x command cylinder, stainless steel
1 x command hose
1 x lower pumping element, stainless steel
1 x delivery hose
1 x pack of clips
1 x installation manual
1 x maintenance manual

1 x tool kit (Vergnet ref. 1086)

Comments:
When ordering this pump the field office should specify the borehole external casing diameter to enable the supplier to determine the appropriate pedestal size.

Packaging and labelling:
The pumping unit is packed in wooden box or container for large numbers.
Containerization (Set qty depending on riser length/installation depth): Qty. 100 complete pump sets per 20-foot ISO shipping container.

Weight/Volume:
Estimated Weight: 80 kg
Estimated Volume: 0.8 m3

Accessories/Spare parts/Consumables:
One maintenance tool kit (level 1) is included with the pump. It is recommended that one installation and one standard tool kit (level 2) be ordered for every 15 pumps. The Field Office is to specify the number when placing orders.

If required, the following items should be ordered separately:
1 x installation and maintenance kit (Vergnet ref. 1074);
1 x spare parts kit for 2 years operation.

Instructions for use:
This pump is used for pumping water from 10-60 metres deep wells, while this kit is supplied with equipment for a 40 metres installation depth.

Related products:
For different riser length specifications, please order with Catalogue Numbers S0005826 (HPV60-2000 for 60m well) and S0005824 (HPV60-200 for 10m well).