S0005831
Water distribution kit,6 taps
Water distribution kit comprising a tap stand with 6 taps, a kit to connect the tap stand to a collapsible tank, and an installation tools kit.
Indicative Price 515.52 USD
General Description:
Water distribution kit comprising a tap stand with 6 taps, a kit to connect the tap stand to a collapsible tank, and an installation tools kit.
Technical Specifications:
Water distribution kit (tap stand) to be used with collapsible water tanks. The stand is made of hot dipped galvanized steel pipes or hot rolled galvanized steel sections. All pipes should be threaded as per ISO 7 (the thread cutting oil must be non toxic type), and must be able to withstand rough handling during use.
Supplied with:
Four sturdy legs (or two "A" frames), each leg fitted with a drilled plate for holding down purposes.
1 x 1 ½" (40 mm) male threaded riser pipe.
1 Female threaded 2"-1 ½" (50 mm-40 mm) junction tee with closing(for the connection to the storage tank or to other tap stands).
2 male threaded Guillemin or Storz couplings.
1 central, horizontal distribution pipe.
6 x Male threaded tap pipes welded to the central distribution pipe.
7 x Female threaded ¾" (20 mm) self-closing taps. Minimum discharge rate per tap: 10 liters per minute at one meter head, operation range: Up to 4 bars.
2 x ¾" (20 mm) female threaded caps (for closing in case of repair of repair of faulty taps).
4 rolls of teflon tape (12 mm x 12 meters each).
4 plated pegs for fixing down of the tap stand, each 30 cm long, minimum diameter 12 mm.
1 piece of wire netting for concrete slab, 0.9 x 1.5 meters each.(Smaller pieces could be supplied to minimize the shipping volume, provided that the necessary overlapping of the net reinforcement is taken into consideration).
Connection kit:
To be used for connecting the collapsible water tank to the tap stand.
Supplied with:
1 length of 6 meter semi rigid hose, for the conveyance of water, plasticized PVC abrasion resistant hose, ozone and weather resistant, smooth bore, fitted with a shock resistant rigid PVC spiral, 50 mm diameter, each end fitted with 2 x 50 mm Guillemin couplings.
Collars
1 x Disposable spanner for tightening of collars.
2 x Spanners for Guillemin couplings.
2 x 50 mm hose clips.
Installation Tools Kits:
Supplied with:
2 x Pick axes 7 lb. c/w hard wood shaft.
2 x Scoops (Irish shovel) with 54" straight wood handle.
2 x 18" stillson pipe wrench.
1 x Barrier tape (500 m roll).
1 x Rope 6 mm, blue polypropylene x 50 m.
1 x Spirit level, 60 cm.
2 x Guilleman wrench 20-65 mm.
1 x Hank of hemp (200 g).
1 x Tube/can grease (400 g).
Packaging and labelling:
The water distribution kit (disassembled), the connection kit and the installation tools kit are packed in a sturdy wooden box, with parts well protected against damage during transportation on rough terrain.
Weight/Volume/Dimensions:
Estimated weight: 72 kg
Estimated volume: 0.5 cbm
Estimated dimensions: 1.2 x 0.5 x 0.8 m
Instructions for use:
The distribution area should be leveled.
Concrete apron beneath the distribution stand is highly recommended.
2 to 3 (maximum) stands could be connected in series. The tank should be elevated to provide the necessary head to facilitate the flow of water.
Related Products