Cable,coaxial,½ inch low loss

General Description:
30 m length low loss ½ inch coaxial cable (hard line) for use with VHF base/repeater stations.

Technical Specifications:
Nominal impedance 50 ohm
Velocity factor 88%
Attenuation typically 0.8 dB per 30m cable at 150MHz
Outer diameter 16 mm
Frequency stability approx 4.5 ppm/ºC
Maximum input power 150W

Supplied with:
Two connectors according to customer specification

Weight and Volume:
Estimated weight: 0.22kg/m
Estimated weight for 30m length of cable: 6.6kg

Comments:
This cable is an alternative to the standard RG-213 base/repeater cable where distance between radio and antenna exceeds 30 m. It gives far less signal attenuation - also on received signals - and will improve the efficiency of the base/repeater station considerably.

The cable can be delivered in other lengths than 30m. Please always give the required length when ordering.

Choose between UHF and N-connectors. Note that DB-222/224 antennas require a female N-connector in one end of the antenna cable.

For prices and delivery time, please contact UNICEF Supply Division.

For additional technical information/support, please consult
with the NYHQ ITD/Global Telecommunications Section in New York (Tel.:+1 212 326 7123, email: globalhelpdesk@unicef.org), or the Regional Telecom Officer.