Sand trap pipe,bh,UPVC,100 ND,1m long

U-PVC sand trap pipe for boreholes, 100 mm nominal diameter,
1 metre long.
Indicative Price 22.45 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description:
U-PVC sand trap pipe for boreholes, 100 mm nominal diameter 1 metre long

Technical Specifications:
U-PVC sand trap pipe fitted with bottom plug, to be used with casing and screen pipes for installation down to 120 metres.
Supplied in 1 metre lengths, flush joint (unless specifically specified bell socket by the field office), male/female trapezoidal threads, as per DIN 4925/8061.
Nominal diameter: 100 mm, (OD 113 mm, ID 103 mm, WT 5 mm).

Packaging and labelling:
The pipes are supplied in bulk, in ISO 20-foot container.

Accessories/Spare parts/Consumables:
If required, the following items should be ordered separately:
S0009120 - Casing pipe,bh,UPVC,100 ND,2.9m long
S0009125 - Screen,bh,UPVC,100 ND,2.9m long
S0009162 - Plug,PVC,bottom,bh sand trap,100 ND

Estimated weight: 3 kg
Estimated volume: 9.6 m3

Shipping Details:
Items to be packed in 20-foot ISO container, unless otherwise specified by the field office at the time of ordering and together with casing and screen pipes if ordered together.
If pipes of several diameters have been ordered at the same time, the smaller diameter pipes will be nested inside the larger diameter pipes to ensure most cost-effective use of the shipping container.

Instructions for use:
The sand trap is used for trapping sand in boreholes.
This pipe is placed below the screen pipes and fitted at the bottom with bottom plug (S0009162).

Related Products