Sand trap pipe,bh,UPVC,125 ND,1m long
U-PVC sand trap pipe for boreholes, 125 mm nominal diameter,
1 metre long.
Indicative Price 22.76 USD
U-PVC sand trap pipe for boreholes, 125 mm nominal diameter 1 metre long
U-PVC sand trap pipe fitted with bottom plug, to be used with casing and screen pipes for installation down to 120 metres.
Supplied in 1 metre lengths, flush joint (unless specifically specified bell socket by the field office), male/female trapezoidal threads, as per DIN 4925/8061.
Nominal diameter: 125 mm (OD 140 mm, ID 127 mm, WT 6.5 mm).
Packaging and labelling:
The pipes are supplied in bulk, in ISO 20-foot container.
If required, the following items should be ordered separately:
S0009121 - Casing pipe,bh,UPVC,125 ND,2.9m long
S0009126 - Screen,bh,UPVC,125 ND,2.9m long
S0009163 - Plug,PVC,bottom,bh sand trap,125 ND
Estimated weight: 3.5 kg
Estimated volume: 12.4 m3
Packed in 20-foot ISO container, unless specified otherwise by the field office at time of ordering, and together with casing and screen pipes if ordered together.
If pipes of several diameters have been ordered at the same time, the smaller diameter pipes will be nested inside the larger diameter pipes to ensure most cost-effective use of the shipping container.
Instructions for use:
The sand trap is used for trapping sand in boreholes.
This pipe is placed below the screen pipes and fitted at the bottom with bottom plug (S0009163).
|There are no attributes assigned to this product|