Handpump,SDWP,INDIA MKII, MS-ROD 12mm

General Description:
Connecting Rods, Mild Steel, 12mm, for SDWP Hand pump, INDIA MARK II type. Extension set of 3 meters length each.

Technical Specifications:
Additional connecting rods for use as spare parts or extension sets with Standard deep well hand-pump, SWDP (India Mark II) (as per specifications from Bureau of Indian Standards, IS: 15500-2004 and SKAT specifications Rev.2 - 2007).

The number of extension connecting rods to be supplied must be specified by the field office at time of ordering the hand pump set, or when else required.

For total installation depth ranges up to 45m depth.

Connecting Rod, made from Mild Steel bar, 12mm diameter x 3 meters length (+10/-0mm), electroplated and passivated as per IS 9301/IS 15500:2004 for use with India Mark II / IM III hand pump, with M12 threaded ends and supplied with corresponding couplers.

NOTE: Rods and Risers can also be supplied in one set composed of one each of both parts, see Material number S0009185.

Packaging and labelling:
As per Annex C: Clause 12.1 of Part 1 of IS 15500:2004,
Recommended Packaging Procedure.

Sea shipment: Wooden crate packing with steel strapped bundles in HDPE sheets.
Air shipment: Corrugated cardboard, jute/plastic laminated sheets, steel strapped and marked.

Related products
Pumps
S0009178, S0009179 and S0009181

GI-pipes
S0009174, S009175,

Rods:
S000xxxx etc………..