Handpump,SDWP,INDIA MKII,Rod centraliser

General Description:
Rod Centraliser, for SDWP/EDWP Hand pump, INDIA MARK II type,
32mm or 40mm nominal diameter, for centralising pump connecting rod.

Technical Specifications:
Rod Centraliser, for SDWP/EDWP Hand pump, INDIA MARK II type,
32mm or 40mm nominal diameter, for centralising pump connecting rod.

The rod centraliser is made of nitrile rubber (NBR) or similar, complying with BS 2751:2001, and as specified by the Bureau of Indian Standards, IS:15500-2004 and SKAT-RWSN Afridev Rev. 5-2007.

For use with either 32mm Nominal Diameter pipes
Nominal diameter: 32mm.

Or for use with 40mm Nominal Diameter UPVC pipes
Nominal diameter: 40mm.

Supplied with appropriate tool.

Packaging and labelling:
The packaging depends on the shipment type.
At a minimum, as per Annex C: Clause 12.1 of Part 1 of IS 15500:2004, Recommended Packaging Procedure.

Weight/Volume/Dimensions:
Estimated weight: 11g
Estimated volume: 0.032cdm

Instructions for use:
The Pumprod Centraliser is used inside rising mains for centralising the Pump Connecting Rod during operation of the pump.

Comments:
Field offices must specify the riser pipe inside diameter at time of ordering in order to enable the supplier to correctly select the appropriate Pump Rod Centraliser.