Rehabilitation Set composed of modified VERGNET Hydro-India Hand Pump set for replacement of standard India Mark pump, for up to 40 metres installation depth
Indicative Price 1,441.89 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description
REHABILITATION Set composed of modified VERGNET Hydro-India Hand Pump set for replacement of standard India Mark pump, for up to 40 metres installation depth

Technical Specifications
REHABILITATION Kit for existing INDIA Mark II hand pumps where the above ground components are functional, i.e. having still operational existing stand fixture of India Mark pump to be reused with the rehabilitation:
The hydro-pump rehabilitation kit, type Vergnet Hydro-India, is for replacement of the underground/well parts of the hand pump installation.

The Vergnet Rehabilitation set for replacement of INDIA MARK II pump types by HYDRO-INDIA pump type, is composed of following:

Incomplete and adapted Hydro-India pump set for installation on existing India Mark base cylinder, i.e. based on Hydro-India pump type installation package - but supplied without base cylinder and fixing frame - and supplied with 40 metres each of complete pressure and riser mains pipes.

Supplied with
1 x SET OF PARTS for MODIFIED India type pump head to be installed on EXISTING base cylinder
1 x base plate with sealing pins
1 x command cylinder, stainless steel
1 x command hose (32/23mm diameter HDPE transmission pipe)
1 x lower pumping element, stainless steel
1 x delivery hose (32/26mm diameter HDPE discharge pipe)
1 x set of clips
1 x installation manual
1 x maintenance manual
1 x tool kit (Vergnet ref. 2380 - Level 1)

Packaging and labelling
The pumping unit is packed in wooden box or into a container if a considerable quantity is ordered and when else appropriate.
Containerization (Set quantity depending on riser length/installation depth): Quantity of around 100 pump rehabilitation sets per 20-foot ISO shipping container.

Weight and Volume
Estimated Weight: 50kg
Estimated Volume: 0.5m3

Accessories/Spare parts/Consumables
When ordering any pump, one maintenance tool kit (level 1) is included with the pump.
It is recommended that one installation and one standard tool kit (level 2) be ordered for every 15 pumps. The Field Office is to specify the number when placing orders.

If required, the following items should be ordered separately:

1 x installation and maintenance kit "level 2" (Vergnet ref. 1074 and 2388), please use UNICEF Catalogue No. S0009204

1 x spare parts kit for 2 years operation, please use UNICEF Catalogue No. S0009203.

Instructions for use
While this kit is supplied with equipment for a 40 metres installation depth, this pump type can be used for pumping water from wells 10-60 metres deep.

Related products
For different riser length specifications, please contact SD/WASH.
Related Products