Handpump,VLOM-65,MKIII-65,Variant 1 Tele

General Description:
Open top Hand Pump, VLOM-65, (INDIA MARK III-65 (SKAT) - IM III 65 - Mark III type), Variant number 1 Package, with Telescopic Stand and for corrosion resistant installation - Package supplied without Riser pipes and Connecting Rods.

Technical Specifications:
Above ground kit of Deepwell Hand Pump - VLOM-65 (as specified by the Bureau of Indian Standards, IS: 15500-2004), also known as INDIA MARK III hand pump (by SKAT International Specifications Rev.2 - 2007), and sometimes as Mark III, with:
Head, Handle, Water Tank, Telescopic Standard Stand
VLOM 65, and with Open Top Cylinder, but without Riser Pipes and Connecting Rods.

FORESEEN FOR: 65 mm ND uPVC riser pipe with Stainless Steel Couplings, not included
AND FOR: SS connecting rods with threaded couplers, (same length) not included. W/reference to UNICEF Catalogue Material Number S0009155.

The VLOM-65/India Mark III hand pump features essentially the same above-ground equipment as the SDWP/India Mark II pump type, hot dipped galvanized manufactured as per IS 15500-2004, complete, but adapted for below ground 65 mm ND riser pipes. And the VLOM-65 hand pump is equipped with Open Top Cylinder.
The pump type is suitable for pumping water up to 39-40 meters, the range must however not exceed the maximum installation depth of 45 m.

This description covers the pump without the riser pipes and connecting rods.
The riser pipes are to be ordered separately (UNICEF Catalogue Number S0009155), being special design uPVC Riser pipes with integrated Stainless Steel couplers, ND 65 mm, 3 m long. The Connecting rods are of Stainless steel, 10.8 mm diameter, 3 m long, with M12 threaded ends, centralizers and couplers.

Supplied with:
1 x Head Assembly - Standard (with Handle assembly).
1 x Water Tank - 65 (with 65mm pipe Socket and Centralizers, without Cone and Cone plate)
1 x Third Plate
1 x Telescopic Stand - Standard
1 x Cylinder assembly - VLOM 65
1 set Spare part kit sufficient for 2 years of operation.
1 set Installation and Maintenance manual.

**) Spare part kit details see Catalogue No. S0009304

Packaging and labeling:
The pumping set packaging depends on the shipment type.
At a minimum, as per Annex C: Clause 12.1 of Part 1 of IS 15500:2004, Recommended Packaging Procedure.

Accessories/Spare parts/Consumables:
If required, the following items should be ordered separately:
One set of spares for two years of operation is included in the kit. For additional ordering, and details, see UNICEF Catalogue No. S0009304.
Standard Tools and Special Tools for installation and maintenance, separate ordering through UNICEF Catalogue No. S0009326(Installation) and S00009327(Maintenance).
Fishing Tools, Platform Shuttering Set and Masonry Tool Set. To be ordered separately through UNICEF Catalogue Nos. S0009182 or S0009187.

Shipping Details:
Sea shipment: Wooden crate packing.
Air shipment: Corrugated cardboard, jute/plastic laminated sheets, steel strapped and marked.

For quick sea delivery, it is essential that the minimum quantities to be ordered correspond to one fully loaded ISO 20-foot container.

Instructions for use and installation option:
The VLOM 65 pump set type can be used for pumping water from deep wells up to 40 meters static water level. This package is equipped only with the open top cylinder below ground. Riser Corresponding UPVC/SS Pipe and SS Connecting Rod extension sets can be ordered through UNICEF Catalogue Number S0009155.

Comments:
Corrosive Water:
This pump package, Variant number 1, is recommended for corrosive/acidic water.

Stand Choice:
For installation on bore wells of up to 150 mm diameter, the Telescopic Stand - Standard should be used. The Normal Stand - Standard is suited for wells in the range of 100 mm to 125 mm diameter casing pipe (For Normal Stand see VLOM-65 Variant 2 and 3 - Catalogue No. S0009302 and S0009303).

Installation Tool Kits:
It is recommended that adequate sets of Standard Tools and Special Tools (Annex D, Clause 1.3 of Part 8, Table D-2.1 and D-3, IS 15500:2004) be ordered for installation and maintenance of this hand pump (separate ordering on UNICEF Catalogue Nos. S0009326 (Installation) and S0009327 (Maintenance)).
Depending on the density of hand pumps in a given area, the installation and maintenance infrastructure and other local conditions, the number of the tool sets being ordered could vary between one set of each type of tools for every 50 pumps to 250 pumps.

Fishing Tools, Etc.:
Similarly, sets of fishing tools for retrieving dropped below-ground components could be ordered at the rate of one each of these items per 25 hand pumps, like platform shuttering set and masonry tool set could be ordered at the rate of one each of these items per 250 to 500 hand pumps, all depending on local conditions (separate ordering on UNICEF Catalogue Nos. S0009182 or S0009187 depending on kit content).


Related products:
S0009300, S0009302, S0009303, S0009304, S0009305. S0009322, S0009323, S0009324, S0009326, S0009327, S0009310, S0009311, S0009312, S0009155, S0009182, S0009187.


Alternative products:
S0009188 to S0009196