Handpump,SDWP,EDWP,MKII,Tool-Kit,Standrd

General Description
Set of standard tools for installation and maintenance of SDWP & EDWP (India Mark II) hand pumps. The set may be customized.

Technical Specifications
Set of STANDARD tools for India Mark II for Installation and Maintenance of Standard Deep Well Hand Pumps (SDWP) and Extra Deep Well Hand Pumps (EDWP), also called IM II, India Mark II, and Mark II hand pumps - as per Bureau of Indian Standards (IS) 15500:2004, and as per RWSN-SKAT Revision 2-2007.

IMPORTANT NOTE
This Standard Tool Kit can be supplied either as one defined complete set as per below list, or it can be customized.
Each of below listed tools can be ordered independently or together with one or more of the other tools. Each unit quantity is the quantity per set.

These standard manufacture tools can be from one of the following brands: Ambica/Venus/Taparia/Jhalani/Waxpol
- and the set is composed as detailed below:

Item No. - Item Set Description - Quantity per set

a) Button die in high speed steel with die holder, M12x1.75 - 1 set
b) Thread tap in high speed steel with handle, M12x1.75 - 3 ea
c) Pipe thread die with die stock 32mm - 1 set
d) Pipe wrench 600mm as per IS:4003/Part I (1978) - 2 ea
e) Pipe wrench 450mm as per IS:4003/Part I (1978) - 1 ea
f-1) Double ended open jaw spanner 17x19mm in CV steel - 2 nos.
f-2) Double ended open jaw spanner 16x18mm (new ISO) in CV steel - 2 nos.
g) Screw driver 250x8mm dia - 1 ea
h) Adjustable spanner 250mm - 1 ea
i) Ball pein hammer with handle (1kg approximately) - 1 ea
j) Hack saw frame with six spare blades, 300mm - 1 set
k) Flat file with handle, rough, 250mm - 1 ea
l) Wire brush, fine wire - 1 ea
m) Lubricating oil in plastic can with nozzled outlet - 200ml
n) Multipurpose grease in packed container - 2kg
o) Nylon rope, 3mm - 75 mtr
p) Spirit level 300mm - 1 ea
q) Tool box with locking arrangement to accommodate above items, except items a, b & c - 1 ea

Note:
[SDWP = Standard Deep Well Pump]
[EDWP = Extra Deep Well Pump]

Packaging and Labelling
As per Annex C, Clause 12.1 of Part 1 of IS 15500:2004, Recommended Packaging Procedures