Gown,isol,nonwoven,ligt,ISO16604,disp,XL

General description:
Gown, isolation, non-woven, lightweight, meets ISO16604 or equivalent standard for viral penetration resistance, disposable.

Technical Specifications:
. Isolation gown, with long sleeves and a waist tie that binds at the back or front
. Fabric, non-woven material, f.e. SMS, SMMS, polyethylene-coated polypropylene, etc.
. Outer layer viral penetration resistant material in critical areas (full front and arms) that is infective agent tested against viral penetration at a minimum pressure of 1.75kPa
. In specific, the material passes a test for resistance to penetration by blood-borne pathogens such as:
(a) ISO 16604:2004, at Class 2 or higher or
(b) ASTM F1671 or
(c) Equivalent international standard
. Minimum average material density: 20 g/m2
. Length (measured at front from middle of neckline to bottom): 110 – 150 cm
. Width or circumference (measured at waist): minimum of 130 cm
. Sleeves finished with double layer cuff, cotton or synthetic, stretchy interlocked jersey, length: 4 - 8 cm
. Non-sterile
. Single use, disposable
. Size: XL
. Conform requirements of EU Medical Devices Directive 93/42, Class I (or equivalent internationally recognised marketing clearance) and/or EU Personal Protective Equipment Directive 89/686, Category I (or equivalent internationally recognised marketing clearance)

Packaging and labelling:
Packaging: 10 pcs. / bag

Labelling on primary packaging must include:
- Name and/or trademark of the manufacturer
- Manufacturer's product reference
- Type of product and main characteristics
- If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging
- Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol)
- Information for handling, if applicable (or equivalent harmonised symbol)
Over packaging: Packaging unit
Labelling on the packaging unit: Labelling to be the same as primary packaging.
Extra information required: Number of units per box.
Instructions for use:
Wear to protect skin and prevent soiling of clothing during activities that are like to generate splashes or spray of secretion and excretions.

Remove soiled gown as soon as possible and perform hand hygiene.

Safety process:
If the isolation gown is damaged (perforation, etc.), it must be disposed in waste container, collected and destroyed. Please refer to WHO publication "Safe management of waste for Health Care".

Weight: 0.59kg
Volume: 0.44m3