Tube, aspirating / feeding, CH16, length 125 cm, sterile, disposable.
Indicative Price 0.17 USD
Tube, aspirating / feeding, CH16, length 125cm, sterile, disposable
Sterile enteral feeding/aspiration catheters for single use
Single channel tube
Proximal end with cup connector, conical tip, allowing the tube to be connected to devices such as feeding syringes (catheter tip) or suction pump system
Open distal end with four side windows
Tube with markings at 40, 50, 60 and 70cm from the distal end
Diameter expressed in Charriere, French gauge
Length expressed in cm
Colour code/ external diameter: Visible on cup connector
Material: Polyvinyl chloride (PVC)
Size selected: Diameter CH16, length approximately 125cm
Initial sterilisation method: Ethylene oxide gas
Packaging and labelling:
Primary packaging: Unit of use.
One (1) aspirating/feeding tube in an individual sterilised peel pack.
Secondary packaging: Protected unit.
One (1) box of 50 aspirating/feeding tubes.
Estimated weight: 0.031kg
Estimated volume: 0.300cdm
Instructions for use:
Sterile aspirating/feeding tube: Device used for aspirating liquids and / or gases from stomach, duodenum and small intestine.
Device used for feeding adult with feeding syringe conical tip. Marking on the tube: 40, 50, 60, 70 cm from the distal end correspond to the following regions: cardia, stomach, duodenum, jejunum.
The size has been chosen as being the most commonly used: CH16, length 125cm, for adult.
Remember to order when needed:
S0366010 - Syringe, feeding, 50ml, conical tip, ster.
Conditions for stock:
Avoid storage at extreme temperatures and humidity levels.
Check the integrity of each unit before use.
Single use material, supplied in sterile packaging.
Do not use if the packaging is damaged.
The aspirating / feeding tube is for single use only.
When inserting a gastric tube, use clean techniques.
Protection of users:
Collect and destroy through incineration in a controlled environment.
Component of a kit:
S9906627 - IEHK2006, kit, suppl.3-renewable
|Component of kits|
|To see icon descriptions, go to |
' Product attribute guide'