Timer,for respiration,ARI (mark 2)

General Description:
Timer, for respiration, ARI..

Technical specifications:
The unit activated by with an easy accessible button.
Activated by pressing the center of the front-side of the device.
By pressing the start button:
1. Produce an audible beep to indicate the countdown has started;
2. Provide red visual indicator informing the user that the device has been activated and is counting down (For example a flashing LED could indicate the unit is currently counting down.)
3. After 60 seconds a double audible beep produced indicating the 60 seconds’ period has passed and the visual indicator should cease indicting the unit has stopped counting down.
4. Pressing the button during an ongoing countdown reset the unit which means: stop the countdown and the visual indicator.
One audible signal (beep) at start and tow audible signal (Beep, Beep) at the end of the cycle.
Visual indication (red LED flashing) during operation and progress during the cycle. (Each second flashing, till the timer is stopped or when it completes the one minute count)
The unit not make any sounds during the countdown (to avoid causing confusion for the person counting the breaths) .
Accuracy should be ± 0.1 second.
The unit battery powered and full batteries allow the unit to support 10 ,000 cycles of 60 seconds as a minimum.
The indicator LED integrated in the casing and not protruding.
A provision included to ensure that the battery is not connected to the internal circuit at the time of delivery. This to avoid unwanted activation, leakage or accidental short-circuit of the unit.

Item Supplied with
1. 1 x blue cord (lanyard) for wearing timer around the neck
Instruction for use and maintenance in English, French and Spanish.

Packaging/labelling
Primary packaging: Unit of use.
One (1) Timer, respiration for ARI + instructions for use in English French and Spanish.
Primary packaging with updated product description, product reference, manufacturing date and shelf-life.

Labelling on the primary packaging:
Name and/or trademark of the manufacturer.
Manufacturer's product reference.
Type of product and main characteristics. If the packaging is not transparent, it must bear a diagram (preferably actual size) showing the essential parts of the product and indicating the position of the product in the packaging.
Lot number prefixed by the word "LOT"(or equivalent harmonized symbol) (if applicable).
Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonized symbol) and Information for handling.
Over packaging: Packaging unit.

User Technical Training/installation:
Not required.

Weight and volume:
Weight: 42g. (packaged)
Volume: 0,00012 m3 (packaged)

MATERIAL SAFETY DATA SHEET INFORMATION (MSDS): Lithium-Metal primary battery, UN 3091 Class 9, Packing Group II, shipping name “Lithium Metal Batteries packed with equipment” / “Lithium Metal Batteries contained in equipment”.
MSDS Report (if applicable).