Hard flooring - for HPT 72m2

General Description:
Hard flooring is a modular flooring system of interlocking plastic tiles creating a flexible hard floor which can be installed inside tents when used for multipurpose accommodation, offices, temporary learning places and storage places.
Its environmentally friendly, involves low energy production process, fully recyclable and can be disposed of safely by burning or burying when recycling is not possible.

Technical Specifications:
The floor is designed considering the needs of people living with impaired mobility and low vision. Floor front ends towards doors on each side are marked with a bright yellow colour, that prevent tripping at entrances. The top surface of the floor is finished and detailed to avoid tripping and slipping, also when wet.

Floor tiles (i.e., 100% high impact Polypropylene) are pre-assembled panels easy to handle for fast assembly/fixing on site, it provides a high load bearing floor on un-even and soft grounds. The floor contains penetration holes to allow water to pass through and channels for power cables to run under the floor.

Floor tiles specifications:
Tile size - 305x102x18mm
Tiles per m2 – 31.5
Weight per m2 – 3.84 Kg
Load resistance per m2: ≤ 2500 Kg
Colour – Light grey (Pantone: 16-4703 TCX) with bright yellow along the edges

Temperature conditions: Able to perform in hot, cold, and wet weather conditions, reduce heat build-up in direct sun light and able to block ultraviolet (UV) rays. Reduced absorption moisture in below zero
temperatures.

Supplied with:
Hard flooring packed in PE carry bag
instruction manual in Arabic, French, and English, with pictures

Packaging and labelling:
The hard flooring is packed in PE carry bags of 48 Kg each, strapped on wooden pallet.

Transport and Storage:
The hard flooring will be shipped in multiple carry bags of 48 kg each strapped on wooden pallet. Airfreight is possible but will be costly due to weight and volume.

Container loading:
20 GP: 54 pallets/18 sets
40 DC/HC: 108 pallets/36 sets

Weight and Volume:
Volume: 1.607
Weight: 330 Kgs

Instruction for use:
Primarily used when tents are intended to eb sued for multipurpose accommodation, offices, temporary learning places, dispensaries, and storage/distribution purposes etc.

Precondition for utilization:
Complete set of PE carry bags strapped on wooden pallet Instructions manual
Installation of size of tent

Alternative if the item is not available:
S0000413 Hard flooring for - 48m²
S0000412 Hard flooring for - 24m2

Addons to be ordered separately for each size:
The five (5) addons i.e., Winter Liner Kit; Inner liner; Hard flooring; Electrical lighting kit, and Solar lighting kit are all warehouse items (standard stock). These addons are size specific and compatible with the tent sizes (24, 48, 72 m2). The addons can be found on the supply catalogue.

Emergency scenarios
The tent fixed with hard flooring is intended to serve as a temporary facility for programme implementation e.g., as temporary learning place for education, child-friendly spaces for child protection, and nutrition facilities for nutrition programme.

Target population:
ECD (early childhood development), school going children, and adolescent.

Emergency scenarios where the item should not be used:
In areas where hurricanes may occur the tent with hard flooring fixed inside may get damaged due to strong likelihood of tent collapse.

Other Emergency scenario considerations:
Since tent cannot be installed on a sloppy ground and/or in hilly/mountainous regions hence installation of hard flooring inside the tent would not be possible.

DISCLAIMER:
All five addons can be installed on tents from all suppliers (i.e., NRS, Alpinter & Ferino) that slightly differ in design, material composition, tent frame structure and installation/dismantling
techniques due to manufacturer specificity.