S6780353

Mask,high-fil,FFP2/N95,no valve,PAC-20


Mask, high-filtration, FFP2/N95, no valve, non-sterile, pack of 20
Indicative Price 44.20 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description:
Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask, 20 pieces per pack

Intended use:
To reduce the healthcare workers risk of inhaling hazardous airborne particles (including dust particles and infectious agents), gases, or vapors. Worn on the face and covers at least the nose and mouth.

Technical specifications
Material: non-woven filter layer
Filtration level: > 95 % for particles from 0.1 to 0.3 micron
Air permeability: > 2 mm H2O
Shape of the mask: duckbill, folded (horizontal) width-wise
Without valve
Respirator mask fits all face shapes, without inspiration/expirationair-leakage
Upper edge has integrated easy malleable nose bridge strip reducingfogging of protective eye-wear
Size nose bridge strip: 4 x 90 mm (w x l) (+/-10%)
Two pre-attached elasticated straps, fitting (i) around top of the head ,(ii) around base of the head
Colour: white
Non-sterile
Single use, disposable
Each mask bares clear identification of
(i) protection provided FFP2/N95,
(ii) which side to wear up (nose),
(iii) manufacturer's name, and
(iv) model reference

Respirator mask conforms to standards:
NIOSH N95 recommended by the CDC and WHO for healthcare workers. Thedisposable respirator should be marked with the manufacturer's name, thepart number (P/N), the protection provided by the filter (e.g. N-95) ,and "NIOSH."
Or
EN 149: 2001/FFP2. The disposable respirator should be marked with themanufacturer's name, EN 149: 2001/FFP2 and CE certification number.
Or
equivalent international standard

Supplied with: Supplier's instruction for use

Shelf life:
As indicated by supplier

Storage conditions:
As indicated by supplier

Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Related Products