Filter set, resilient 10LPM, oxygen conc

GENERAL DESCRIPTION: 
Oxygen concentrators contain several filters to ensure the extracted air is clean when it enters the machine. If these filters are not replaced and/or cleaned in a timely manner, the unit might not be able to reach operational specifications and the lifespan of the unit will be reduced.

This material is comprised of a set of two different filters in below listed quantities. The set should be enough to run one oxygen concentrator for an average of 15 hours daily for a period of two years, however if the concentrator is operating in harsh environmental conditions, more frequent filter replacements may be required.  
 
TECHNICAL SPECIFICATIONS
2 x spare metal cabinet filters (gross particle filter)
2 x spare intake filters

Operators and technicians are to follow the instructions in the user and maintenance manuals supplied with the concentrators on cleaning and replacement of filters. If these manuals are no longer available contact the manufacturer or the Medical Devices Unit in Supply Division, Copenhagen for copies.
 
ENVIRONMENTAL CONDITIONS 
Storage conditions (packaged): -25 to 70°C, 15 to 95% relative humidity non-condensing 
Operating altitude range: 0 - 2,000 meters 
 
SHELF LIFE
Filters in this set do not have expiry dates.

WEIGHT AND VOLUME 
Weight: 0.9 kg (packaged) 
Volume: 0.009 m³ (packaged)

WARRANTY
24 months 

INSTALLATION REQUIREMENTS
The User Manual supplied with the device details all installation instructions which can be undertaken by users.

TECHNICAL TRAINING REQUIREMENTS
The User Manual supplied with the device details all maintenance and troubleshooting procedures which can be undertaken by users.

Additionally, the contractor device has a QR code printed on the casing/user interface which directs the user to a product-dedicated website with multi-lingual User Manual, training videos, troubleshooting instructions, and contact information for the manufacturer and local service providers.

AFTER SALES SERVICE AND SUPPORT
Virtual support with installation and user set up at no cost.
Virtual clinical, technical and user training of operators and technical staff at no cost.
In person trainings can be provided at a cost, depending on the location and number of sites.

QUALITY MANAGEMENT SYSTEM
Manufacturer is certified for ISO 13485:2016 Medical devices - Quality management systems -- Requirements for regulatory purposes.