Water level indicator for boreholes, with 50 metres cable and acousticand visual signal.
Indicative Price 270.85 USD
Water level indicator for boreholes, with 50 metres cable; acoustic and visual signal
Water level depth indicator, battery powered, e.g. 4.5 Volt (3 x 1.5 V), for use in boreholes to a maximum depth of 50 metres.
The water level indicator consists of a flat, two cores, heavy duty cable calibrated in metres and centimetres on one side.
A probe is securely fastened to the free end of the cable and the cable with probe is attached to a cable winding reel. Measurements are taken by slowly lowering the cable with probe down the borehole until the probe comes in contact with the water. On contact with the water, the unit emits a high frequency audible signal, and the user can then take a depth reading from the calibrated cable. The unit is also equipped with an optical (light) signal that switches on upon contact of the probe with water.
Note: For lengths of 100, 150 and 200 metres or more, please see catalogue item numbers S0005472, S0005471 and S0005447 respectively.
UNICEF country offices should use non-standard catalogue product number U482820 and specify the required length if different from lengths of 50, 100, 150 and 200 metres.
Packaging and labelling:
The package is sturdy, with extra protection around the probe (e.g. double wrapping + extra cardboard), and the probe safely fitted within the cable winding reel frame during transport.
Weight and Volume:
Estimated weight: 2.2 kg
Estimated volume: 0.03 m3
The following different accessories can be ordered independently but under the standard catalogue number S0005474:
1. Carrying bag for Borehole Water Level Indicator
2. Ground Sensor for Depth Sounding
The following spares/consumables are not supplied with the indicator, but are expected to be available locally:
2 x set of spare batteries (e.g. 3 x 1.5V)
Instructions for use:
The item is used for indication of water level in boreholes.
|There are no attributes assigned to this product|