S0782110

Syringe,disp,2ml,w/ndl,21G/BOX-100


Syringe, 2ml, sterile, with detached (bi-packed or mounted) needle, 21Gx1 1/2” (0.80 x 40mm), disposable, box of 100.

Indicative Price 3.01 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description:
Syringe, 2ml, sterile, with bi-packed needle, 21Gx1 1/2” (0.80 x 40mm), disposable, box of 100

Intended use: inject fluids into, or withdraw fluids from, the body

Technical specifications:
Syringe Components: Syringe, two pieces: barrel with Luer nozzle and piston/plunger or three pieces: barrel with luer nozzle, stopper and piston/plunger.
Syringe capacity: 2ml
Syringe graduation: Graduated scale on the barrel, easy to read. Scale intervals of 0.1 or 0.2ml. Graduation lines of 1.0ml volume increment conform to ISO 7886-1:2017.
Syringe Barrel: sufficiently transparent to allow easy measurement of the volume contained in the syringe and detection of air bubbles. Length with a maximum usable capacity of at least 10% more than the nominal capacity conform to ISO 7886-1:2017.
Barrel Nozzle: Luer lock or luer slip in accordance with ISO 80369-7:2021. The Luer nozzle shall be situated centrally.
Syringe Material: medical grade plastic (Polyethylene (PE)/ polypropylene (PP)/ polystyrene (PS).
Needle Components: Needle with base (Luer type fitting and complies with ISO 80369-7:2021), and protective cap.
Needle Material: Stainless steel conform to ISO 9626:2016.
Base and protective cap: medical grade plastic.
Measurements:External diameter expressed in Gauge and millimeters.
Length expressed in inch and millimeters.
Size selected: 21Gx1 1/2” (0.8x40mm).
Colour code: visible at the base of the needle and complies with ISO 6009:2016.

Syringe with needle: Syringe with bi-packed needle: Disposable.

Sterile, (ethylene oxide sterilization and compiles to ISO 11135:2019)

Standards:
Product and packaging conform to ISO 7886-1:2017, ISO 7864:2016, ISO 9626:2016, ISO 11135:2019.
Quality management system (QMS): Products and manufacturer must be certified and comply with ISO 13485: 2016 requirements (or equivalent).
Marketing approval certificate: Product and manufacturer must conform to European Medical Device Regulation (EU) 2017/745 (or equivalent).

Packaging and labelling:
Primary packaging: Each syringe and needle bi-packed in an individual sterilized peel-off pack made of paper and/or plastic.

Secondary packaging: Protective packaging - 1 carton of 100 bi-packed syringes with needles.
Related Products