Wheelchair, active urban, rigid

GENERAL DESCRIPTION
Wheelchair, manual, active urban, rigid frame

IMPORTANT INFORMATION
Minimum order quantities apply.
Inappropriate prescription and fitting of wheelchairs, cushions and accessories may harm the user’s health and/or function. Therefore, this product should only be purchased after consultation with the Medical Devices Unit in Supply Division.

INTENDED USE
Wheelchair, manual, active urban, rigid frame:
FUNCTION AND ENVIRONMENT: For people who self-propel. For use in urban indoor and outdoor settings.
POSTURAL SUPPORT: For CHILD and ADULT users who can sit upright and balanced without additional support, as well as those needing additional support such as adjustment of wheelchair configuration and/or addition of postural support devices. Users who do not need high back support AND/OR arm supports. Relationship of seat, back-, arm- and foot support dimensions anatomically appropriate for size of wheelchair.
SUPPLIED WITHOUT CUSHION.

TECHNICAL SPECIFICATIONS
Wheelbase and overall length:
Wheelbase similar to, or shorter than transport wheelchair with large rear wheels
Overall length, similar to, or short than transport wheelchair with large rear wheels

Size and dimensions:
Seat width range: 6 sizes between 250 and 500 mm in 50 mm increments
Seat depth: Adjustable
Backrest height: Adjustable

Frame: Seat
Seat: sling
Seat angle: Fixed OR adjustable (using tools) depending on model selected
Seat height adjustment justment through rear wheel and castor adjustment

Frame: Back support
Back support: tension adjustable
Seat-to-back support angle adjustable using tools: at least 80-115 degrees

Frame: Other
Rigid frame
Push handles, integrated with back post, non-slip, ergonomic grip
Rear wheel can be horizontally adjusted using tools to achieve active/safe rear wheel position and maintain backward stability with maximum combined seat and seat-to-back support angle configuration.
Front seat frame/lower leg support is tapered/narrower than the seat width for smaller sizes

Clothing guards OR arm supports:
Clothing guards to protect clothing and cushion from rear wheels, dust, mud, etc. in all configurations of rear wheel position, seat angle, seat height, etc.: Removable OR fixed depending on model selected

Foot supports:
Seat to lower leg support angle: between 90 and 100 degrees depending on frame type and model selected
Rigid, single foot support
Height adjustable: at least 280-380 mm

Rear wheels and parking brakes:
Quick-release rear wheels with push rims
Diameter x width: 610 x 35 mm on all sizes OR 560 x 30 mm on small sizes AND 610 x 30 mm on large sizes depending on model selected
Pneumatic rear tyres OR puncture-proof polyurethane rear tyres depending on model selected
Rear wheels parking brakes, frame mounted, push-pull type

Front castors:
Two front castors
Diameter x width: at least 127 x 25 mm
Puncture-proof, solid rubber OR polyurethane castor wheels depending on model selected

Wheelchair weight:
Total weight: maximum 16.8 kg
Frame weight without rear wheels: maximum 11 kg


User weight capacity:
Suggested user weight capacity: CHILD: at least 75 kg
Suggested user weight capacity: ADULT: at least 105 kg

ASSEMBLY
Depending on model selected: Either: Fully assembled, with standard removeable parts (rear wheels) to be attached OR partly assembled and need to install castors and back rest (time required 10 minutes, tools included, no training needed, detailed, illustrated assembly manual included)

SUPPLIED WITH
1 x complete set of tools required for basic adjustments
Lower leg/calf strap (heel straps on foot support not acceptable)
Detailed illustrated instructions for safe use

WARRANTY
Limited warranty to cover defects in material and workmanship only. Warranty excludes normal wear or damage following inappropriate use or lack of maintenance.
Frame: at least 3 years
Components: 1 year

MINIMUM ORDER QUANTITIES
Minimum order quantities apply

PACKAGING / LABELLING
Please note: Minimum order quantities apply
One (1) unit per box
Dimensions:
- Unit Weight in Kg (including its packaging): 19 kg
- Unit Volume in m³ (including its packaging): 0.312 m³
Labelling: Compliance with EAN 128 bar code requirements

ESTIMATED LEAD TIME
100 days

ENVIRONMENTAL CONDITIONS
Operating conditions: 0 to 40 degrees Celsius; 10 to 91% RH
Storage conditions: 0 to 40 degrees Celsius; 10 to 90% RH

ITEMS REQUIRED, BUT NOT SUPPLIED
Wheelchair seat cushion. Select appropriate cushion/s according to user profile:
S0004012 Cushion,wheelchair, posture, layered
S0004014 Cushion,wheelchair,pressure, mod layered
S0004015 Cushion,wheelchair,pressure,mod no layer
S0004018 Cushion,wheelchair,pressure,deep,section

ESTIMATED LIFE SPAN
3-10 years depending on model selected

USER FITTING AND TRAINING REQUIREMENTS
Users to be fitted and trained by trained wheelchair service personnel.

MAINTENANCE REQUIREMENTS
Product maintenance as per manufacturer’s instructions by trained technical personnel.

RELATED PRODUCTS
S0004012 Cushion,wheelchair, posture, layered
S0004014 Cushion,wheelchair,pressure, mod layered
S0004015 Cushion,wheelchair,pressure,mod no layer
S0004018 Cushion,wheelchair,pressure,deep,section
S0004020, Strap pelvis/hip, wheelchair
S0004021 Strap lower leg/calf, wheelchair
S0004022 Strap ankle/foot, wheelchair

ALTERNATIVE PRODUCTS
S0004005 Wheelchair,active urban,fold,more support
S0004006 Wheelchair, active urban, folding

QUALITY MANAGEMENT SYSTEM
- Manufacturer is certified for ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes.
- Supplier is certified for ISO 9001 Quality management systems – Requirements.

MARKET CLEARANCE AND DEVICE CLASSIFICATION
CE certified under the EU MDR 2017/745 as Class I device.

SAFETY AND PRODUCT STANDARDS
ISO 7176-8:2014

NOMENCLATURE
GMDN Code:
41630