S0005461

Lvl sensor w/datalogger, temporary,<100m


Level sensor and logger for temporary installation in boreholes with water level fluctuation of maximum 100m – for boreholes with expected exceptionally high draw-down.
Indicative Price 966.20 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General description:
Borehole logger for pump testing (temporary installation/deployment) in boreholes with static and dynamic water level difference (drawdown) of max. 100m, for measurement of water level and temperature.

Technical specification:
The borehole pressure (water level) and temperature sensor and datalogger are mounted on a 100m stainless steel cable for short term deployment (typically during the pump testing of newly drilled boreholes). The sensor is made of stainless steel or equivalent corrosion resistant material.
The pressure range is 0 to 10 bars (0 to 100m) with a resolution of 1cm and accuracy of 0.05% FS.
The sensor and datalogger are self-powered via an internal battery with up to 10 years life (dependent on usage).
Sufficient internal storage to store pumping test data is included with 72’000 measurements and the same amount of backup data space. Data is retrieved by cable, and the logger can be configured via cable as well.
The equipment comes with a stainless-steel wire cable 100m long (additional cable length available for procurement separately for deeper boreholes/aquifers, see below). The entire set is corrosion resistant, made of stainless steel. A bracket is included for fixing the device at the top of the borehole.
Installation and maintenance manual are included at a minimum in English, and in French and Spanish where available.
The system is designed to be used in boreholes with diameter as small as 2”. Materials are approved for use with drinking water.
The temporary system comes with a 1-year warranty.

Packing instructions:
The package will be sturdy, with extra protection around the probe (e.g. double wrapping + extra cardboard), and the probe safely fitted within the cable frame during transport – or equivalent type of packaging guaranteeing the integrity of the product.

Related products:
S0005462: additional stainless steel cable length, per length of 50m

Useful links:
UNICEF Groundwater Monitoring Product Guide:
Supply Intranet - Groundwater monitoring product guide
Related Products