S0005466

Lvl sensor w/datalogger,perm,vented<100m


Vented level sensor and logger system with vented cable for permanent installation in boreholes with water level fluctuation of maximum 100m – for boreholes with exceptionally high draw-down – with remote monitoring capacity.
Indicative Price 3,328.30 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General description:
Permanent borehole logger with vented cable for installation in boreholes with drawdown of max. 100m, with measurement of water level and temperature.

Technical specification:
The borehole pressure (water level) and temperature datalogger is meant for long-term/permanent equipment of boreholes. The sensor is made of stainless steel or equivalent corrosion resistant material.
Pressure measurement is relative to atmospheric pressure with the use of a vented cable (no separate barometer required for barometric compensation). Pressure range is 0 to 10 bars (0 to 100m) with a resolution of 0.001 bar and accuracy of 0.05% FS.
Temperature range is 0 to 50°C, with a resolution of 0.1°C, accuracy +/- 0.3°C

The sensor has a 22mm diameter and comes with a 100m long PUR vented cable with stainless steel reinforcement (additional cable length available for procurement separately for deeper boreholes/aquifers, see below).

The datalogger is equipped to transfer data both via wire (from a laptop) or wireless through a remote transmission unit with integrated cellular modem mobile communication system and sim card slot for cellular network communication (sim card to be procured locally).
The datalogger/transmission unit comes with 4 x 1.5V easily replaceable C batteries. It also has internal storage capacity with 1’120’000 data points storage capacity, for manual (wired) download if necessary.

The transmitter is housed in a robust weatherproof, impact and UV resistant enclosure rated IP67 and a 35mm diameter so that it can be fitted inside a borehole as well, to prevent vandalism.

The components’ material is approved for use with drinking water. The system comes with a fixing device to attach to the top of the borehole.

Installation and maintenance manual are included at a minimum in English, and in French and Spanish where available.

Packing instructions:
The package will be sturdy, with extra protection around the sensor (e.g. double wrapping + extra cardboard).

Related products:
S0005467: additional vented cable length, per length of 10m
S0005468: Upgrade of the sensor to include conductivity measurement as well
S0005469: LoRaWAN transmission device

Alternative products:
S0005464: Permanent vented system, 50m
S0005463: Permanent non-vented (absolute) system, 50m
S0005465: Permanent non-vented (absolute) system, 100m

Useful links:
UNICEF Groundwater Monitoring Product Guide:
Supply Intranet - Groundwater monitoring product guide
Related Products