Port.Water Tst Kit,Advanced,Single Incub
Portable and rugged water quality test kit intended to be used on site or in a laboratory to test water for total and thermotolerant coliform bacteria, turbidity, pH, conductivity, temperature and an extended range of chemicals.
CONSUMABLES ARE NOT INCLUDED WITH THE KIT AND MUST BE ORDERED SEPARATELY.
Indicative Price 2,763.10 USD
The mapping of the portable and traditional water quality test kits is available at the following link (internal only). Please consult the document to easily compare the different products available on global LTAs.
20test%20kits%20mapping.pdf?csf=1&web=1&e=x6oVyd">LTA Guidance Note
- water quality test kits mapping
Portable and rugged water quality test kit intended to be used on site
or in a laboratory.
Kit can test water for total and thermotolerant coliform bacteria, using
membrane filtration technique standard method, as well as turbidity, pH,
conductivity, temperature and an extended range of chemicals thanks to
the included digital meters and photometer.
CONSUMABLES ARE NOT INCLUDED WITH THE KIT AND MUST BE ORDERED
PHOTOMETER CAN BE USED TO TEST AN EXTENDED RANGE OF CHEMICALS. STANDARD
MATERIAL NUMBERS EXIST FOR IRON, FLUORIDE, MANGANESE AND NITRATE (refer
to Related Products below). OTHER REAGENTS CAN BE ORDERED USING U340000
AND INDICATING THE PARAMETER TO BE TESTED.
Kit includes all equipment and accessories to conduct a minimum of 20
bacteriological tests at the same time.
Those are (but not limited to):
- an incubator with adjustable temperature to measure either total
coliform or thermotolerant coliform. Kit includes an easy method for
user to check the incubator temperature.
- an internal battery (non-spillable lead/acid) with sufficient capacity
to power the incubator for at least one test cycle. Kit includes a low
battery indication. When kit is directly plugged into a power socket,
battery ensures uninterrupted incubation in case of grid power failure.
- a complete filtration assembly, adequate for use with standard 47mm
diameter membrane filter and reusable petri dishes.
Kit also includes the following equipment to test for physical and
- compact, handheld and waterproof digital meter to measure turbidity.
Pre-calibrated turbidity meter has a measuring range of at least 0 to
1000 NTU, accuracy of ±2.5% and resolution of at least 0.1 NTU. Meter
includes user replaceable (or rechargeable) batteries. Meter is supplied
with sample cuvettes, silicone oil, cleaning cloth and calibration
standard solution. NOTE: for some products, turbidity is measured using
the photometer rather than a separate turbidity meter.
- compact, handheld and waterproof digital meter to measure pH. Meter is
pre-calibrated with automatic temperature compensation and automatic
buffer recognition. Range: 0 to 14 pH unit; accuracy: ±0.05 pH unit;
resolution: 0.1 pH unit. Meter includes user replaceable (or
rechargeable) batteries and replaceable sensor. Meter is supplied with
- compact, handheld and waterproof digital meter to measure conductivity
and temperature. Meter is pre-calibrated with automatic temperature
compensation. Range: 0 to 20 mS/cm, 0 to 50 degrees Celsius; accuracy ±
3% full scale; resolution: 0.01 mS/cm. Meter includes user replaceable
batteries and replaceable sensor. Meter is supplied with calibration
- compact, portable and robust photometer to measure multi chemical
parameters for drinking water quality. Photometer has an internal memory
able to store up to 500 measurements. Meter includes user replaceable
(or rechargeable) batteries with low battery warning. It comes with all
necessary accessories: sample vials, cleaning cloth, brush and dilution
Kit, including all accessories, fits in a robust carrying case with easy
access and appropriate and protective holding arrangements.
User manual with clear instructions on how to use, maintain, store and
troubleshoot the equipment is available at least in English and French.
|There are no attributes assigned to this product|