Water tank, liner and accessories, 95m3

General Description:
MUST BE ORDERED WITH THE STEEL FRAME S0009218. IF A ROOF IS REQUIRED CONSIDER S0009212 HEAVY DUTY STEEL ROOF OR S0009219 LIGHTWEIGHT PVC ROOF

Part of a 95m3 steel tank, the set includes drinking water liner, all parts to assemble the tank steel wall, water level indicator, concrete anchor bolt set and basic tool set.

The entire set is packed in a wooden crate.
Approximate weight: 200kg
Approximate dimensions: 150 x 75 x 75 cm

THE FOLLOWING COMPOSITION CAN BE SUBJECT TO SLIGHT DEVIATIONS ON MATERIALS AND COMPONENTS.

1 x tank liner, approved for drinking water use, welded to fit 95m3 steel frame (S0009218), which is about 6.4 m in diameter and 3m high, and allowing for a minimum 300mm turndown on outside.
1 x repair kit for liner including: 1m2 of liner material, 10m roll of 50mm wide patching tape. (similar to S0009220)
1 x 21m length of 12 mm diameter split plastic primary wall capping.
1 x 21 m length of 25 mm diameter split plastic secondary wall capping.
60 x 25 mm diameter steel spring clips
1 x set including 800 x M10 20mm zinc plated round head bolts, 800 x M10 zinc plated nuts, 800 x M10 zinc plated washers
1x flange assembly, 4” BSP with bolts and gaskets.
1x gate valve, 4” BSP (F), brass
3 x gate valve, 3” BSP (F), brass
4 x flange assembly, 3” BSP with bolts and gaskets, GRP
5 x cloth-based, self-adhesive tape, 50mm wide, 55m roll.
2 x PTFE tape, 12mm wide, 12m rolls
1 x reducing bush 4” BSP(M) to 3” BSP(F)
1 x hex nipple, 4” BSP(M), GRP/PVC
2 x hex nipple, 3” BSP(M), GRP/PVC
1 x Tee, 4” BSP(F), GRP/PVC
1 x elbow 90 degrees, 3” BSP(M-F), GRP/PVC
1 x pack of plastic bolt-end covers (50 pce) – to protect liner material.
2 x set of blanking plate bolts, nuts and washers.
1x rope polypropylene, 6mm diameter, 55m long
1 x instruction manual placed inside a resealable plastic bag.
1 x set of basic tools and protective equipment.
1 x anchor bolt set.
1 x water level indicator set.