Water tank, steel frame only, 95m3

General Description:
MUST BE ORDERED WITH THE TANK LINER AND ACCESSORIES S0009215. IF A ROOF IS REQUIRED CONSIDER S0009212 HEAVY DUTY STEEL ROOF OR S0009219 LIGHTWEIGHT PVC ROOF

Part of a 95m3 steel tank, the set includes corrugated galvanized steel sheets to make a round, rigid, 95m3 water tank: 6.4 m in diameter and 3m high.

The entire set is packed in a wooden pallet.
Approximate weight: 485kg
Approximate dimensions: 300 x 90 x 60 cm

THE FOLLOWING COMPOSITION CAN BE SUBJECT TO SLIGHT DEVIATIONS ON MATERIALS AND COMPONENTS.

24 x corrugated galvanized steel sheets with bolt holes.
2 x corrugated galvanized steel sheets with bolt holes and flange (3”) hole in middle of sheet, and 175mm from the long edge of sheet to centre of hole. Suitable for outlet and washout, high level inlet and overflow.
1 x corrugated galvanized steel sheets with bolt holes and flange (4”) hole in middle of sheet, and 175mm from the long edge of sheet to centre of hole. Suitable for outlet and washout, high level inlet and overflow.
1 x corrugated galvanized steel sheet with bolt holes and flange (3”) hole in the centre of the sheet and pre-installed cover plate. Suitable for outlet when using the tank for sedimentation/flocculation process to avoid drawing sediment.