S0156000

Sterilizer,steam,39L


Steam sterilizer, pressure type, capacity 39 litres.
Indicative Price 538.26 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

GENERAL DESCRIPTION
Steam sterilizer, pressure type, capacity 39 litres.

INTENDED USE
A device designed for total elimination and/or inactivation of microorganisms from medical devices and related products using pressurized steam (i.e., moist heat) as the sterilizing agent; it is used for products non-sensitive to high temperature, water, or steam. It includes a treatment chamber with an inner container, it may be intended to sterilize wrapped and/or unwrapped devices. The device comes without a heating source and can be heated through a kerosine stove, electrical heater or even an open fire.

TECHNICAL SPECIFICATIONS
Minimum unit gross capacity: 39 litres, indicate if different.
Sterilization capacity: 26.4 litres, indicate if different.
Aluminium vessel suitable for sterilisation under superheated steam.
Operational pressure: 17 - 21 PSI / 1.17 - 1.45 bar, , indicate if different.
Operational temperature: 250°F / 121°C, indicate if different.
Made of cast aluminium alloy which resist corrosion and aging.
No separate seal required; uses metal-to-metal seal for the lid.
Provided with a safety mechanism which prevents opening the unit it is still pressurized.
Equipped with clamping locks made from Bakelite or an equivalent material.
The removable cover is provided with a handle from Bakelite or an equivalent material.
Contains a control valve with an extended exhaust tube to allow air trapped at the bottom to escape.
Contains an excess-pressure relief valve.
Contains a safety overpressure plug.
Comes with an inner aluminium container with handles and a rack to be placed under the container.
Scored water level mark inside chamber.
Dial type geared steam gauge graduated in kg / cm², and/or PSI and degrees Fahrenheit and/or Celsius, and with colour-coding showing sterilizing zone (green) and caution zone (red).

SUPPLIED WITH
Instructions for assembly, use and maintenance in English, French and Spanish
1 x Spare over pressure rubber plug.
1 x Document listing of accessories and spare parts.

ITEMS REQUIRED, BUT NOT SUPPLIED
S0558100Indicator,TST control spot/PAC-300
S0845176Masking tape, type 1 steam indicator
S0845177Papersheet,crepe,for ster. pack/PAC-250

ESTIMATED LIFE SPAN
Seven years

WARRANTY
Two years.

ENVIRONMENTAL CONDITIONS
Storage conditions: 0 - 50°C / 90% RH.
Operating conditions: 10 - 40°C / 90% RH.
Atmospheric pressure: 1 – 70 kPa

WEIGHT AND VOLUME (Packaged)
Weight: 24.2 Kg.
Volume: 153.5 dm³.

INSTALLATION / COMMISSIONING REQUIREMENTS
This device does not require installation

TRAINING REQUIREMENTS
There is no specific user training required, user should follow the instructions as provided in the user manual.

MAINTENANCE/USER REQUIREMENTS
There are some minor maintenance activities, such as cleaning, lubricating the metal-to-metal seal and safety checks which are detailed in the instructions for use.

RELATED PRODUCTS
S0106000Drum,sterilizing,165mm diam
S0107700Drum,sterilizing,260mm diam
S0108000Drum,sterilizing,290mm diam
S0109000Drum,sterilizing,340mm diam
S0170000Stove,kerosene,single-burner,pressure

ALTERNATIVE PRODUCTS
S0157000, Sterilizer,steam,24L

COMPONENT OF A KIT
S9908200 - Sterilization, kit C

QUALITY MANAGEMENT SYSTEM
- Manufacturer is certified for ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes.

MARKET CLEARANCE
Approved by USA-FDA for distribution in the USA

NOMENCLATURE
GMDN Code: 38671
Related Products