S5007335

Squatting plate,plastic,w/o pan,120x80cm


For your emergency sanitation response, this standard plastic squatting plate, 120 x 80 cm includes a lid and 4 pegs to secure it to the ground. By itself it is used as direct drop toilet, however complementary materials are available for disability inclusion, use with flushing (above pit or offset) and superstructure.
Indicative Price 39.40 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

Unit:
Each

Indicative Dimensions, Weight and Volume for 1 squatting plate:
120 x 80 x 5.5cm
9.5kg
0.063m3

Related Materials
S0005848 Latrine Add-on, child & disabled people. UNICEF CCC indicates that at least 1 out of 10 toilet cubicles are accessible for children and persons with disabilities.
S5007340 Pan and “Goose neck” trap in context where flushing toilet directly above the pit is required.
S5007345 Pan and “P” trap in context where flushing toilet in an offset pit is required.
S0005844 Latrine superstructure, single cubicle where setting up toilet superstructure with local material may be challenging.
S0005843 Latrine superstructure, double cubicle where setting up toilet superstructure with local material may be challenging.

Technical Details
Self-supporting plastic direct-drop squatting plate with footrests, moulded in LLDPE with a keyhole cover moulded in HDPE.
Keyhole cover is preferably attached and hinged.
Materials can differ, but must be plastic providing light weight, sturdy and easy to clean slab.
The upper side has a slight slope towards the drop hole of the plate to facilitate cleaning.
The squatting plate can securely support a weight of 150kg at the centre, with the two extreme ends laying off at least 100mm of firm support (ground or beams).
Holes are provided on the four corners of the squatting plate and can be used to secure the plate to the ground using the provided four pegs/anchors.
The underside of the squatting plate has inserts to enable the fastening of either the Pan and “Goose neck” or Pan and “P” trap options.

Related Products