S0004177

Filter set, Longfian 10LPM oxygen concen


Filter set for the JAY-10 (10LPM) oxygen concentrator (single and dual flow models) manufactured by Longfian Scitech Co., Ltd.
Indicative Price 12.90 USD
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

GENERAL DESCRIPTION
The JAY-10 (10 LPM) oxygen concentrator contains several filters to ensure the extracted air is clean when it enters the machine. If these filters are not replaced and/or cleaned in a timely manner, the unit might not be able to reach operational specifications and the lifespan of the unit will be reduced.

RECOMMENDED PURCHASE QUANTITY
At least one filter set recommended to be purchased with every oxygen concentrator. The set should be enough to run the oxygen concentrator for an average of 15 hours daily for a period of two years. However, if the concentrator is operating in harsh environmental conditions, more frequent filter replacements may be required.

TECHNICAL SPECIFICATIONS
This material is comprised of a set of three different filters in below listed quantities
6 x Gross particle filter (PN 010201020)
6 x Inlet filter (PN 010201027)
1 x Bacterial filter (PN 010203291)

SUPPLIED WITH 
1 x Manual with instructions for cleaning and replacement of all filters in English, French, Spanish at minimum. If only available electronically online, a document with URL to online resources should be included. 
1 x Packing List of all filters included in the filter set, with photos/illustrations and part numbers. 

SHELF LIFE
5 years.

ENVIRONMENTAL CONDITIONS 
Capable of being stored continuously in ambient temperature of -40 to 55°C, relative humidity ≤ 95%. 

WEIGHT AND VOLUME (EA)
Weight: 0.133kg
Volume: 0.002m³

MAINTENANCE/USER REQUIREMENTS
Operators and technicians are to follow the instructions in the user and maintenance manuals supplied with the concentrators on cleaning and replacement of filters. If these are no longer available contact the Medical Devices Unit in Supply Division, Copenhagen for copies.

QUALITY MANAGEMENT SYSTEM 
- Manufacturer is certified for ISO 13485:2016 Medical devices - Quality management systems -- Requirements for regulatory purposes. 
- Supplier (if not the manufacturer) at a minimum is certified to ISO 9001 Quality management systems – Requirements. 
Related Products