- S0845039 Flow splitter,for oxygen concentrator
The oxygen flow splitter is a device intended to distribute medical oxygen from a source to multiple independent outlets. It can be connected to any low-pressure oxygen source, including concentrators, cylinders and a centralized system, and is suitable for table top or wall mounting.
Indicative Price 129.26 USD - S0845048 Humidifier bottle, nonheated, reusable
A sealed bottle of water inserted into a breathing circuit to add moisture to the breathing gases for administration to a patient. This type of humidifier does not heat the gas.
Indicative Price 9.01 USD - S0845053 Flow meter, 0 – 3.5 LPM oxygen
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 3.5 LPM, for medical oxygen. Minimum Order Quantity (MOQ): 50 pieces or 150 pieces depending on the supplier.
OPTIONAL: ISO 32: colour coding for medical gases (indicate when ordering).
Indicative Price 121.29 USD - S0845055 Flow meter, 0 – 8 LPM oxygen
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 8 LPM, for medical oxygen Minimum Order Quantity (MOQ): 50 pieces
Indicative Price 90.10 USD - S0845056 Flow meter, 0 – 15 LPM air
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 15 LPM, for medical air. Minimum Order Quantity (MOQ): 50 pieces or 150 pieces depending on the supplier. OPTIONAL: ISO 32: colour coding for medical gases (indicate when ordering).
Indicative Price 95.76 USD - S0845057 Flow meter, 0 – 15 LPM oxygen
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 15 LPM, for medical oxygen. Minimum Order Quantity (MOQ): 50 pieces or 150 pieces depending on the supplier. OPTIONAL: ISO 32: colour coding for medical gases (indicate when ordering).
Indicative Price 82.97 USD - S0845064 Spares kit, Canta 8LPM, oxygen concentr
Spare parts kit for maintenance and service of Canta 8 LPM oxygen concentrator (V8-WN-NS) both single flow and double flow models, for use by trained technical staff. One kit recommended to be purchased with every 10 concentrators. The quantities below are based on an estimated maintenance support period of 5 years.Indicative Price 936.05 USD - S0004176 Spares kit, Longfian 10LPM oxygen concen
Spare parts kit for the maintenance and service of the Jay-10 10LPM oxygen concentrator manufactured by Longfian Scitech Co., Ltd.
Indicative Price 1,087.00 USD - S0004177 Filter set, Longfian 10LPM oxygen concen
Filter set for the Jay-10 (10LPM) oxygen concentrator manufactured by Longfian Scitech Co., Ltd. Minimum Order Quantity (MOQ): 20 sets.
Indicative Price 12.90 USD - S0845029 Oxygen Analyzer, ultrasonic, handheld
Hand held, battery powered device that measures the oxygen concentration in a flow of gas from a medical gas source or, with adapters, through a medical gas-flow device such as a ventilator or anaesthesia system. The intended application is checking gas supply equipment performance.
Indicative Price 494.00 USD