Water tank kit,complete,w.SteelRoof,95m3

General Description
Complete cylindrical steel reinforced water storage tank with a volume of 95m3. This semi-permanent tank is mainly used to store chlorinated drinking water but could also be used for raw water storage or for water treatment.

The kit is composed of corrugated steel sheets, a liner (suitable for drinking water), a low-profile steel roof, fittings, and accessories.

The kit is composed of 3 sets, each packed individually.

1 x S0009218 Water tank, steel frame only, 95m3. Packed on a wooden pallet.
Approximate weight: 490kg
Approximate dimension: 300 x 90 x 60cm

1 x S0009215 Water tank, liner, and accessories, 95m3. Packed in a wooden crate.
Approximate weight: 200kg
Approximate dimension: 150 x 70 x 75cm

1 x low-profile steel roof. Packed in a wooden crate.
Approximate weight: 430 kg
Approximate dimension: 320 x 95 x 55cm

THE FOLLOWING COMPOSITION CAN BE SUBJECT TO SLIGHT DEVIATIONS ON MATERIALS AND COMPONENTS.

Refer to S0009218 for indicative composition of water tank, steel frame only, 95m3.
Refer to S0009215 for indicative composition of water tank, liner and accessories, 95m3.

Low-profile steel roof:
25 x corrugated steel sheets G275 0.60m gauge. Numbered, shaped and curved pieces.
1 x hatch cover – drilled for safety cable,
26 x EPDM mats – for brackets
1 x roof ventilation cowl
1 x roof cowl plate
1 x roof cowl foam – 4 pce
1 x foam strip, 40m total
22 x wall to roof bracket
4 x roof strut – Part A side, with mounting pin
2 x roof strut – Part B centre
4 x easy clamp – for roof struts
1 x hatch safety cable with tags and fixings
7 x roof to wall tie-down straps
1 x aluminium bar and plate – for access hatch strengthening.
1 x pre-arranged sets of fasteners (bolts, nuts, washers, etc…)
2 x hard hats
1 x neck protector
2 x combination spanner 17mm
2 x flat blade and 14mm spanner combination tool
2 x 1m2 scrim lined rubber mats for protecting liner.
4 x pairs of gloves with rubber grip
1 x installation manual.